BMW Scanner 1.4.0 owners, what did YOU code?

[Dave_B]

So I received my present from China a few days ago. I've only had time to reimage a laptop with WinXP (old spare Dell D600 I had laying around and will dedicate for this BMW) and connect it to make sure it see's the car and so on.

I've found these 2 video's which help a little since there isn't really much on how to use the software.

http://s16.photobucket.com/user/Knig...Part1.mp4.html

http://s16.photobucket.com/user/Knig...Part2.mp4.html

So far I'm thinking I'll be doing the all windows down/up via remote long hold on lock/unlock, I'll also do visual and audible alarm (I do not have the factory alarm) simulation and door lock over xyz km.

So what did you do? Or want to do?

[Tnhl1989]

So regarding PASoft. Here is a nice thread regarding the set up on the coding.
http://forum.e46fanatics.com/showthread.php?t=935613

For more information regarding installation on Windows 7 or 8.
http://forums.bimmerforums.com/forum...4#post23146094

I put together a whole zip folder with everything here -
http://tnhlserver.net/BMW%20Scanner%20140%20Tony.zip

I coded the lcm to the car to fix the tamper dot when I purchased the car. Change some light settings and added alarm features since I install the oem alarm. Can't recall anything else.

[alexandre]

I did remote windows down, remote windows up, disabled trunk opening when car is locked, enabled alarm, unlock the 4 doors at once with the keyfob, euro hazards, clutch-less start, and disabled DRL's.

[johnrando]

I don't know what s/w William used but we did triple blink, windows all up, windows all down, individual up/down (vert only I think), vert top up/down with remote. I didn't have to do these other as the were set how I liked, but I would have done clown nose blink on, citylights off, and no chirp but lights blink when locked

[wsmeyer]

I did top up / down from remote (same setting as sunroof)
Both doors unlock with one click
Turned on rear window and all auto up (after modding switches)
Disabled key in ignition warning
Set service interval to minimum

I did some other stuff with NCSExpert but BMW Scanner will do most of the common stuff.

[wsmeyer]

I don't know what s/w William used but we did triple blink

You have to use NCSExpert to set triple blink. Plus an LCM with SW version 4

[Dave_B]

Good point, I wanted to change the service interval to 6k miles.

[wsmeyer]

Good point, I wanted to change the service interval to 6k miles.

I just double checked, valid entries are:

6.000_km
11.000_km
25.000_km

[Washburn]

Congrats on getting into coding, and have fun!
I am Jealous - hopefully I will be able to make it to one of the meets and get some things coded my car as well...
none of you successful coders live near me

[alexandre]

I just double checked, valid entries are:

6.000_km
11.000_km
25.000_km

Can't you put anything there ? I set mine to 12,500 km