Page 3 of 24 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 232

Thread: UltraGauge OBDII Gauges

  1. #21
    Join Date
    Aug 2011
    Location
    Las Vegas, NV
    Posts
    5,732
    Quote Originally Posted by Washburn View Post
    This really might be my next toy...
    Gary: can you give some more details on exactly how you mounted yours in front of the shifter?
    Thanks!
    - Remove the shift knob.
    ( Put the gear selector in Neutral, car off E brake on. Grab the knob and yank up REALLY hard. Don't break the Sunroof ).
    - Remove the shift boot.
    - Remove the console piece, bezel I suppose?
    - Flip over the bezel and approx 1" from the corner I used a rasp file (round) and filed a grove large enough for the cable.
    ( When you do this file down away from the top otherwise it catches the aluminum trim. Make sure it's where you want it. On mine the grove is just to the left of the long plastic inner edge. I also had to slightly file the face of the ashtray lip, it's under the bezel out of sight).
    - Route the cable with the plug end down thru the side of the center console. This is tricky because the plug is huge, I used a small pry bar to help get it thru.
    - Route it up underneath the dash and use a drill or the round file and cut a grove in the cover close to the OBDII port.
    BAVSOUND Stage 1 - UltraGauge - Valentine One - Orion V4's - ARC-8's
    TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
    VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k

  2. #22
    Join Date
    May 2011
    Location
    The Ocean State
    Posts
    12,671
    Gary.... I'm interested in this now....dammit!
    .........2008 GT Silver 997.1tt.........................2004 TiAg ///M......................2001.5 Audi S4 Avant.........

  3. #23
    Join Date
    Aug 2011
    Location
    Las Vegas, NV
    Posts
    5,732
    Name:  ImageUploadedByTapatalk1366899438.182506.jpg
Views: 542
Size:  37.3 KB
    BAVSOUND Stage 1 - UltraGauge - Valentine One - Orion V4's - ARC-8's
    TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
    VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k

  4. #24
    Join Date
    Jan 1970
    Location
    Fayetteville, NC
    Posts
    1,752
    Yeesh Gary that seems more involved than I thought to install it like that
    I might just have to be content with the cable being visible or think of some other way to install it
    Thanks a bunch for the great info and tips though ...
    2005 AW ZHP Coupe. CW, Alcantara, Leather st. wheel, HK, Xenons, Step, Dinan chip & air box, USASpec, Sprint Booster


  5. #25
    Join Date
    Aug 2011
    Location
    Las Vegas, NV
    Posts
    5,732
    Welcome...It really was't hard to do except removing the shift knob.

    There are several other ways to mount it. Check it out.
    http://ultra-gauge.com/ultragauge/su...g_Options.html
    Last edited by WOLFN8TR; 04-27-2013 at 06:13 PM.
    BAVSOUND Stage 1 - UltraGauge - Valentine One - Orion V4's - ARC-8's
    TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
    VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k

  6. #26
    Join Date
    Aug 2011
    Location
    Las Vegas, NV
    Posts
    5,732
    I swapped out the 2 orange ones I had for a Red one. It actually matches perfect now!

    Attachment 8110

    Attachment 8111

    Attachment 8112

    Here is the cable routed under the trim.

    Name:  ImageUploadedByTapatalk1366940248.417574.jpg
Views: 523
Size:  125.7 KB
    BAVSOUND Stage 1 - UltraGauge - Valentine One - Orion V4's - ARC-8's
    TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
    VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k

  7. #27
    Join Date
    Jan 1970
    Location
    Lebanon, OH
    Posts
    37,875
    Pretty close. Nice work!

    HTC DNA, Williamsburg, VA
    "Flame suit NOT REQUIRED!!!"
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs

  8. #28
    Join Date
    Aug 2011
    Location
    Las Vegas, NV
    Posts
    5,732
    Quote Originally Posted by danewilson77 View Post
    Pretty close. Nice work!

    HTC DNA, Williamsburg, VA
    Pretty Close? Geez...

    It's not a exact match but I'm happy with it. I think it would look good in a Imola ZHP.
    BAVSOUND Stage 1 - UltraGauge - Valentine One - Orion V4's - ARC-8's
    TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
    VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k

  9. #29
    Join Date
    Jan 1970
    Location
    Lebanon, OH
    Posts
    37,875
    Quote Originally Posted by WOLFN8TR View Post
    Pretty Close? Geez...

    It's not a exact match but I'm happy with it. I think it would look good in a Imola ZHP.
    No man. It looks really good. Thanks for taking the time to share your thoughts, do the work and research, and share it with us.

    I'm sure I'll pick one of these up.

    HTC DNA, Williamsburg, VA
    "Flame suit NOT REQUIRED!!!"
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs

  10. #30
    Join Date
    Jan 1970
    Location
    Fayetteville, NC
    Posts
    1,752
    Looks great, the red! was it lens film from your friend again, or something different?
    I want to have THAT exact film, (lol) because i like it that much - I'd gladly pay for shipping if you have some left. OR if you can point me to the exact thing with a link, I'd be set
    2005 AW ZHP Coupe. CW, Alcantara, Leather st. wheel, HK, Xenons, Step, Dinan chip & air box, USASpec, Sprint Booster


Page 3 of 24 FirstFirst 1234513 ... LastLast

Similar Threads

  1. Replies: 16
    Last Post: 02-24-2014, 09:14 AM
  2. FS - LeatherZ gauge panel w/gauges and 2 complete sending units
    By 330i ZHP in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 0
    Last Post: 11-07-2012, 12:21 AM
  3. Garmin ecoRoute HD and Android = gauges/code reader for $100
    By MrMaico in forum General -- ZHP Related
    Replies: 15
    Last Post: 12-14-2011, 05:33 PM
  4. For Sale: OBDII USB Diagnostic Cable
    By WOLFN8TR in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 3
    Last Post: 10-13-2011, 09:12 AM
  5. Bavarian Technic BT Cable OBDII Diagnostic Tool
    By Tampa330i in forum Maintenance
    Replies: 7
    Last Post: 12-12-2010, 05:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •