I do it yearly
I do it yearly
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
No. The car is in the shop now.
ON EDIT: somehow my post with the screen image got deleted. Here it is:
Last edited by Dual; 08-05-2016 at 06:12 AM.
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Things are not going well. The shop took the car in for what was supposed to be a couple-hour job and kept adding delay after delay. Finally got it back today 28 hours later. I checked the work. Two things pop out at me immediately and I'm asking for input:
First off, the sensors, one is shown blurred in the photo, have zero nomenclature on them and are raw silver aluminum in color. Factory??
Second, I just don't recall that the hose coming off the expansion tank (I'm assuming that's what it is) was all bound up with US-style electrical tape as shown. I'm almost feeling like they damaged it.
Opinions??
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
That is a picture of my old sensor. The writing on it is hard to see unless you look up close to it.
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Thanks, Vas- yeah: that's what I had in my car. Now it's generic-silver color with no markings. I'm equally concerned by all that tape on the hose(?) coming off the tank.
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
I'll go take a look at the wife's car and see what the sensors look like and the hose.
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |