Quote Originally Posted by telijah View Post
Might take more than that. Here are photos I took when I had the trouble on the driver side. Only replaced the bulb housing, which is the female side of the connector.



That damage is the result of arcing caused by more current than the connector is designed for. Non OEM bulbs with a lower resistance would be the most likely cause.

At this point both sides of the connector are irreparable. Considering that and the fact that this connector isn't one that is generally disconnected and connected I wouldn't hesitate to cut the wire going to the bad pin and soldier it directly onto the trace on the housing. Problem solved, permanently.

William.