For Sale: 2004 BMW 330i ZHP 86k $15,000

[Roush611]

I have to sell my zip unfortunately. Work is giving me a car and I can't afford to have both right now. A little about the car

Yr: 2004
Make: 330i zhp
Mileage: 86k
Trans: 6 speed
Color: Silver grey
Price: $15,000 obo

Interior: Black leather, alcantra e-brake and shift boot, alcantra steering wheel, black cube trim. The interior of the car is a 9/10 condition wise. There is a little wear on the bolster of the driver seat.

Exterior: The exterior is a 7/10. The entire front end of the car was resprayed about 10k miles ago but a lot of freeway driving has been done since. Unfortunately the hood is in need of an extremely good detail or a respray. Something got on it (no idea what) and left spots in the clear coat (almost like water spots). I have tried to clay, hand polish and hand wax with no results. You can only see the spots a certain angles. There is also a scratch on the back left side of the bumper, not terrible but noticeable. (parking lot hit and run the second day I owned the car).

The car has a dinan intake as well as dinan stage 2 software. The speakers were upgraded to BSW all the way around, the system rocks. There are 6k hid's in the lows and fogs as well as orion v2 angel eyes. The windows have been tinted with 5% on the back window and 20% on the rest except the windshield.

Mechanical condition

The belts and vanos were done about 5k ago. The valve cover gasket was replaced about 10k ago but is leaking because it did not seed properly. The clutch has about 20k left in life easy. I drive the car like an old man. I just got the oil changed Thursday and BMW said the only things that need to be addressed are the valve cover gasket and LCABS which are a 5/10. (10 being the worst).

I hate to see this car go but I have to. Feel free to ask any questions. The best way to get a hold of me is email jdoc611 at gmail dot com or cell (nine two five) 699-9636.

This pic was taken about 1 month ago and the car looks exactly the same.


untitled.jpg by JDoc Photography, on Flickr



The car has a clean title and all. I

[Crestwood1001]

What kind of cost/labor can be assumed with the valve cover gasket?

[webster]

What kind of cost/labor can be assumed with the valve cover gasket?

it's $50 worth of parts and ~2 hrs or so of DIY labor

or $400-500 at a shop.

[Crestwood1001]

To bad ur on the other side of the country

[danewilson77]

To bad ur on the other side of the country

Report location, over.

Sent from SIGFest-2012, USA on HTC via TTv2