What did you do for your ZHP/ BMW / MINI today? #2

[BMWCurves]

22322282340 That's the part number and there are two mounts. The other are the old ones. As far as the procedure I did it a bit backwards than most diys. I loosened the two bolts for the exhaust hanger and then raised the trans a bit. I removed the 4 bolts from the bracket and then the two bolts that hold the transmission mounts. Remove the bracket and now you have more access to the top nuts of the mounts. Lower the transmission now to get more space. I have no idea how people got to the top two nuts with the bracket in place. I tried using a wrench but it's so tight in there. I was able to use a ratchet with a short 13 mm after lowering the transmission. To install the new ones I just did it backwards. Much easier to install the mounts on the transmission and then the brace.

As for the jacking points, I always prefer to use the frame. It's easier to jack up by the pads and put the stands on something more solid than some rubber mounts especially with a lowered car.

Cool, good info. Maybe I'll do this down the road, seems simple enough.

Good work. Not sure I even know where that part is.

I didn't either, I had to look it up. I'm still not quite sure, but I am about 95% confident it is somewhere in this area, pictured below:

[san]

Installed koni's at just_geroge's (Dave) place... Thanks Dave! Was lots of fun...


Sent from my iPhone using Tapatalk

[ELCID86]

Installed koni's at just_geroge's (Dave) place... Thanks Dave! Was lots of fun...


Sent from my iPhone using Tapatalk

Nice teamwork? Got em dialed in yet?


Thumbs, iPhone, TaT.

[Johnmadd]

Installed koni's at just_geroge's (Dave) place... Thanks Dave! Was lots of fun...


Sent from my iPhone using Tapatalk

how does it feel now?

[cakM3]

I washed my ///M this afternoon and am getting ready to apply some wax... also replacing my Euro side markers with a smoked set because the driver's side euro side marker broke the other day. :/

[3ZHPGUY]

Got mine detailed and ready for The Part in The Park car show, in Brentwood,m, TN. That's if it stops raining.








Sent from my iPhone using Tapatalk

[cakM3]

Looks gooooood

[orange260z]

Showed both cars a little love today - washed them both, and cleaned the wheels. The 911 wheels are the exact opposite of the BMW - they are open and airy, and very easy to clean properly. You can even clean the barrel without removing the wheel... try that with the 135M!!

[05Imola]

I want that color 911!

[az3579]

Got mine detailed and ready for The Part in The Park car show, in Brentwood,m, TN. That's if it stops raining.








Sent from my iPhone using Tapatalk

Definitely doesn't look it's mileage, Guy.