anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
Yea it's an OEM part, so been around since the car has
I placed an order from PartsGeek. Never heard of them... we'll see how it goes.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
Coding question: Is it possible to code our tail lamps to be on at all time? i.e. day time running rear lights? I searched for a bit but could not find anything. If it is possible, what is the NCS Expert keyword that I am looking for? Thanks.
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
Lawrence
"But Mama....That's where the fun is!"
BMW CCA #192742
San Diego & Sin City Chapter
NRA Lifetime Member
STABLE
'90 M3 AWII - Garage Queen (The Crown Jewel)
'20 X5 M Sport Tourquis Blue - #3 Son Ride
'23 X5 M Sport Sapphire Black - #1 Son Ride
'23 X5 M Sport Mineral White - Daughter & Grand Kids Ride
'24 X4 M40i Brooklyn Grey - SO's New Ride
'05 330i ZHP Mystic Blue Metallic 6 spd - My Ride
'03 Nissan Frontier XE Crew Cab - Hauler & Down Range vehicle
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
I had to remove my black cube trim recently, so I could remove the head unit. I managed to crack the plastic bit that one of the metal post slides in to (well, it's the one around the head unit, so I guess it's the only post for that piece). I ended up crazy gluing it back together, and it would hold the post again. However, I had to remove the trim again, and this time, the post stuck in the hole, and I broke the backing off entirely.
Is there any sort of permanent fix, besides replacing the cube trim entirely? OR COURSE, this was the only piece of trim that didn't have a scratch or a gouge on it, so I'm not super upset...
Looking at this zhp and seller says it has the premium package (it's a different zhp from the one on the off-topic page). Is it true? unable to tell from the build sheet
last 7 of VIN are KM06798