Digging my own grave- parts list included

[runhouse]

Alright, here is the list of items being shipped:

Genuine Bmw:
pilot bearing
T/O bearing and guide tube
Front and rear ( F+ R) bump stops
F + R strut/shock mount gaskets
M3 trans mounts
Fuel filter
Exhaust manifold gaskets
Cold climate pcv kit
Crank and cam position sensors + orings (all)
VCG + grommets
OFHG kit
TB gasket
MAF oring and gasket
Guibo
CSB, nuts, bolts, butyl tape
Sealing compound
Crankshaft seal kit
All 02 sensors
Brake pad wear sensors
M3 sway bar (free) and new bushings
Strut mount reinforcement plates
Disa valve
Intake boots
Flywheel bolts
Oil pam gasket and bolts
Bmw performance S/D rear rotors

ECS tuning:
Performance poly diff bushings
2pc S/D front rotors
Aluminum F connector
Brass clutch fork pivot pin
Po boy clutch stop
SS brake rotor set screws

Assorted:
Stoptech sport pads
Drilled/safety wired oil pump nut
Dr vanos rebuilt unit
Chase bays SS vanos oil line
UUC DSSR
Turner ultimate power pulley kit w/ tensioners
Turner shifter upgrade/rebuild kit
Meyle HD front sway links
Bimmerworld performance engine mounts
ATE type 200 brake fluid
Brass radiator bleeder screw
CSF alum radiator kit w/ silicone hoses
Stewart water pump
Bav Auto Viton OFHG
Garagistic 80a subframe bushings
Garagistic bronze clutch+brake bushings
Condor speed shop SS brake+clutch lines
Condor rear subframe reinforcement plates
Vorshlag RSMs with reinforcment plates
^(12mm for koni yellow S/A)

EDIT *10mm for koni RSM. Thanks terry for sorting that for me of no charge!!!

Already have/had awaiting install:
New clutch and flywheel
Ngk spark plugs
Mann oil filter
Bosch starter


Pretty sure im forgetting some stuff i already have. And will still be getting coolant, trans+diff fluids, oil, EDIT: syncro design works spherical RTABs, new Michelin PSS, some other odds and ends, surely stuff that couldnt be planned for upon teardown/install.

This will do it for the time being. In the future there will still be more to come.

I will have a lot of perfectly working, and recently replaced genuine parts to get rid of after alls said and done. ...while youre in there...


Sent from my iPhone using Tapatalk

[John in VA]

Good luck - talk to you next year!

[ZHPizza]

Just a lil tune up gat dam

[PetesZ]

Did you have a cash annuity and needed to spend cash now?

That is more in parts that I paid for the track car.
Good luck and where do we send flowers for your mechanic?

[cakM3]

That's quite a list you got there!

[Newjack]

[DeathTrap]

Damn son...
RIP

[san]

Hopefully you bought them from fcp (apart from the ecs tuning ones you specifically mentioned) so you don’t have to buy them again


Sent from my iPhone using Tapatalk

[johnrando]

Wow, what a list. Good luck!

Sent from my SM-G955U using Tapatalk

[runhouse]

Yes, i understand the cost is not justified to some. But thats for another discussion. Call it a labor of love/terrible addiction.

Luckily my mechanic and i both will be doing this all together. We both have a terrible addiction to these things. And an entire shop at our disposal. Thankfully. Hahaha. And nope. This should get completed relatively soon.

Also, fcp got a large portion of the money. Not all of it. But a lot of it.


Sent from my iPhone using Tapatalk