His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Last edited by Dual; 12-12-2017 at 07:41 AM.
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
This is the one I had.
https://www.ecstuning.com/b-ecs-part...scf03bw03aceb/
I tried in 4 years ago. It's $144. There's gotta be a reason it's less than half price of most others.
Bending it with my pinky is probably an exaggeration, but it flexed a lot with very little pressure.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Finally got around to check out my strut towers..
Driver
Passenger
I'm going to do the reinforcement plates this summer but i have to say if I didn't know about this issue I wouldn't have even thought twice to check them out because they look to be in good shape. Is typical mushrooming on the towers much worse than this?
Sent from my iPhone using Tapatalk
No. It's about like that. But this can happen as well....
http://www.zhpmafia.com/forums/showthread.php?t=5720
Sent from my SM-G955U using Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Wow I just went thru this thread. I was concerned about installing the reinforcement plates, but Turner says my fixed camber plates already act as reinforcement plates so no need. Not like I drive the car that much at all lol! I still want one of them solid strut tower bars though.