So I'm installing my predator v2 angel eyes and the instructions show a harness without a box on it. Mine have a white box (pictured below)
Did anyone else's have this? If so how did you route the wires out of the headlight?
![]()
So I'm installing my predator v2 angel eyes and the instructions show a harness without a box on it. Mine have a white box (pictured below)
Did anyone else's have this? If so how did you route the wires out of the headlight?
![]()
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD
You should just be able to route the wires and box between the headlights and housing.
HTC Thunderbolt+TT
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
I tried but there isn't enough flex in the housing... I'm stumped as the instructions here... http://www.fastm.com/m3/angeleyes_orionv2.html show them without the box.
EDIT: is there more flex in the box than I think there is? I don't wanna break the housing but the box will require quite a bit of flexing to get it past
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD
Finally got them in and functioning. It was a pain to get the run the wires through the headlights but I got it! They look so mean!
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD
Good news. pics!
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Good deal.
HTC Thunderbolt+TT
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Nice. In for pics and mounting solution.
Hankook Ventus V4's 205/55/16 | 16" BMW OE Style 45's | ECSTuning 15mm Spacers | Thule 45050 Crossroad Rack | Thule 870XT Fairing | LLumar 35%/20% Tint
Custom Vienna Austria Euro Plate | GoMiniGo "No-Holes" License Plate Bracket | Smoked License Plate Cover | Black License Plate Frame | Khoalty LED License Plate Lights
nice job waiting for some pics
I'll post some pics later today. I've done quite a bit since I last posted in my project thread so pics will be posted there
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD