Originally Posted by
330i ZHP
I have done it in my garage each time on the ground - and by myself each time - I have done the dead lift while trying to bolt in...and used a jack...the best result was using a trans jack.
If I had known you were willing to come down I would have said lets install it here.
I sent it with one 6 spd output flange - you will need one of yours if 6 spd...if yours is auto then you should be ok with the 2 output flanges currently installed...they pop right out with a slight pop.
I dont have the tracking number in front of me - but if you can find out if it is still at the FedEX/Kinko's location - then I can try to go get it and you can come down...or bring it down at some point
That would be great! I'll take you up on that! I'm sure you know all of the shortcuts after doing it a few times....Yep, I got a 6 speed....
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers