Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 435 of 823 FirstFirst ... 335385425433434435436437445485535 ... LastLast
Results 4,341 to 4,350 of 8230
  1. #4341
    Join Date
    Feb 2011
    Location
    Bronx, New York
    Posts
    806
    For my set up I want 15mm spacers in the front and no spacers in the back. When I order my studs should I order them all the same size? 90mm in order to fit the 15mm spacers up front. Or should I order 90mm studs for the front and regular 75mm studs for the back, since I'm not putting any spacers in the back. ? Which is it?




    Sent from my iPhone using Tapatalk
    Photobucket

  2. #4342
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,650
    Quote Originally Posted by L0veZHP View Post
    For my set up I want 15mm spacers in the front and no spacers in the back. When I order my studs should I order them all the same size? 90mm in order to fit the 15mm spacers up front. Or should I order 90mm studs for the front and regular 75mm studs for the back, since I'm not putting any spacers in the back. ? Which is it?




    Sent from my iPhone using Tapatalk
    I think 90mm without a spacer is going to be VERY long, but that's just my 2¢
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

  3. #4343
    Join Date
    Feb 2011
    Location
    Bronx, New York
    Posts
    806
    Idk the website says 90mm is to fit 20mm spacers or under but if you guys have better ideas let me know


    Sent from my iPhone using Tapatalk
    Photobucket

  4. #4344
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,650
    Quote Originally Posted by L0veZHP View Post
    Idk the website says 90mm is to fit 20mm spacers or under but if you guys have better ideas let me know


    Sent from my iPhone using Tapatalk
    No you're right about the 90 for whichever axle you're putting spacers on. But it'll be too long (IMO) for the wheels without. I'd go 75mm for the no-spacer wheels.
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

  5. #4345
    Join Date
    Nov 2016
    Location
    Charlotte, NC
    Posts
    3,130
    Pulled the rear seat to run my backup camera wiring and noticed (1) that the rubber has been torn off all around the fuel pump, so I guess that's been replaced and (2) that there is an extra plug just hangin out under the seat. Anyone know what that little guy is?


  6. #4346
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Quote Originally Posted by Sockethead View Post
    I like the studs myself. The original reason I got studs was that I was going through different thicknesses of spacers and different wheels. Saved me a lot of money in buying a bunch of different sizes of bolts.
    +1

    Sent from my S8+
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  7. #4347
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    10,244
    Quote Originally Posted by ZHPizza View Post
    Pulled the rear seat to run my backup camera wiring and noticed (1) that the rubber has been torn off all around the fuel pump, so I guess that's been replaced and (2) that there is an extra plug just hangin out under the seat. Anyone know what that little guy is?

    I had my seat out last summer for my interior swap. Looking back at my admittedly dim pics, that plug is not in my car. Not sure what it could be. My car has PDC but clearly that's not wiring for it.

  8. #4348
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,650
    Quote Originally Posted by BMWCurves View Post
    I had my seat out last summer for my interior swap. Looking back at my admittedly dim pics, that plug is not in my car. Not sure what it could be. My car has PDC but clearly that's not wiring for it.
    I have it, and was befuddled as well. Meant to look up the wiring diagram, but got distracted by some shiny object, and here we are.
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

  9. #4349
    Join Date
    Nov 2016
    Location
    Charlotte, NC
    Posts
    3,130
    Quote Originally Posted by BMWCurves View Post
    I had my seat out last summer for my interior swap. Looking back at my admittedly dim pics, that plug is not in my car. Not sure what it could be. My car has PDC but clearly that's not wiring for it.
    Quote Originally Posted by 704sw View Post
    I have it, and was befuddled as well. Meant to look up the wiring diagram, but got distracted by some shiny object, and here we are.
    And all three of our cars are 2005's.

    William's must be built wrong. That's the only logical conclusion that I can draw.

  10. #4350
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    10,244
    Quote Originally Posted by ZHPizza View Post
    And all three of our cars are 2005's.

    William's must be built wrong. That's the only logical conclusion that I can draw.
    If mine's built wrong, I don't want one that's built right.

Page 435 of 823 FirstFirst ... 335385425433434435436437445485535 ... LastLast

Similar Threads

  1. Random Picture Thread
    By tripod06 in forum Everything Non ZHP (the place for non-ZHP photos)
    Replies: 1142
    Last Post: 07-17-2023, 08:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •