It's such a tight fit there was really no need to. Getting those off the old battery was fun.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Basically once you get them off ( hopefully without breaking them ) put the new battery in place, run some Super Glue around one side then press the two pieces together. I used a thick rubber band and wrapped it around the keyfob several times the. Let it dry for an hour. Next just silicone the remaining seam. I found some black silicone at Lowes.
I originally used plumbers goop but it did not secure it good enough. The two sides would move when pushing the button.
I will see if I still have the links for info on this.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
The original battery is Soldered on real good. It was a Beouch getting the terminals off mine without messing them up.
Also I would put it back together and rubber band it, test it out then go back and glue it together.
Here are the links...
Diamond Key Battery Replacement
BMW 3 Series Battery Replacement & Programming.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Awesome Thanks.
I ordered it tonight. Hopefully get this issue settled by mid next week!
'01 330i
Your Welcome...
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Got the new battery in and resynced the key. Good as new..used some permatex silicone as well as superglue to seal it. Hoping that will hold and seal adequately.
Sent from my DROID BIONIC using Tapatalk 2
'01 330i
Sweet! That's how I sealed my keyfob. Been all good for a year now.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k