PDA

View Full Version : Cube trim fasteners



LTCMontana
08-05-2013, 07:25 AM
I am looking at the realoem site and can't figure out which part I need.

THe clips that hold the cube trim on just below the passanger side airbag have broken. They have a 'repair kit' list but not sure if that is the right one.

Anyone been there done that?

danewilson77
08-05-2013, 07:35 AM
This goes into back of trim:

http://www.ecstuning.com/Search/SiteSearch/51458266808/

This goes in dash:

http://www.ecstuning.com/Search/SiteSearch/51458266814/

TomTomTuning
08-05-2013, 07:43 AM
I'm not sure about a repair kit but here's the parts that hold the trim on.

Pin (51458266808)
Red Inserts (51458266814)

If you broke the trim's molded pin holder then I'm not sure exactly how that can be repaired.
One of mine is broken, so I'm curious if there's a way to repair it. I was planning to just epoxy the pin to the back of the trim.

danewilson77
08-05-2013, 08:35 AM
I'm not sure about a repair kit but here's the parts that hold the trim on.

Pin (51458266808)
Red Inserts (51458266814)

If you broke the trim's molded pin holder then I'm not sure exactly how that can be repaired.
One of mine is broken, so I'm curious if there's a way to repair it. I was planning to just epoxy the pin to the back of the trim.

Epoxy

Sent from my HTC6435LVW using Tapatalk 2

LTCMontana
08-05-2013, 09:43 AM
Thanks Dane...ordered.

derbo
08-06-2013, 06:26 PM
Epoxy

Sent from my HTC6435LVW using Tapatalk 2

I use jbweld :)

danewilson77
08-06-2013, 06:34 PM
I use jbweld :)

Sure. Quick set.

Sent from my HTC6435LVW using Tapatalk 2

ELCID86
08-07-2013, 05:00 AM
I got the orange (red) bits from eBay.


Shawn in VA.
Via thumbs and Tapatalk.