New Shoe Day!

[fantinno]

First addition to my ZHP, a set of Champion Motorsports RG5 wheels, 19x10 rear and 19x8 front wrapped in Michelin PSS. These things are 10 lbs lighter than the TSWs I replaced @19lbs for the 19x10, and wow you can feel the difference having less rotating mass. Can't wait to get the H&R race springs and Koni yellows installed now :-D

http://i1293.photobucket.com/albums/b593/fantinno/55EAA39E-B1BC-4843-AD2F-6B0DE47A7205_zpsdzmm0ty4.jpg (http://s1293.photobucket.com/user/fantinno/media/55EAA39E-B1BC-4843-AD2F-6B0DE47A7205_zpsdzmm0ty4.jpg.html)

http://i1293.photobucket.com/albums/b593/fantinno/D43F4CF0-2D3B-4613-BA6A-590D5A3621AA_zpsp9w1ozcm.jpg (http://s1293.photobucket.com/user/fantinno/media/D43F4CF0-2D3B-4613-BA6A-590D5A3621AA_zpsp9w1ozcm.jpg.html)

http://i1293.photobucket.com/albums/b593/fantinno/51F565CD-8CAF-4337-A6D1-6758C48FC3D9_zpsewyk8bdl.jpg (http://s1293.photobucket.com/user/fantinno/media/51F565CD-8CAF-4337-A6D1-6758C48FC3D9_zpsewyk8bdl.jpg.html)

[Avetiso]

Looks great!

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

[Newjack]

Looking good man!

[Oli77]

I can dig this. But isn't your car low enough?

[fantinno]

Thanks guys!

Two fingers of gap up front and one in the rear, so I wouldn't mind just a tiny bit more low, I like where these cars sit with the race springs and I'd like the heavier spring rate with the Konis :-)

[ZHPLove]

Looking good!

Sent from Tapatalk on my Nokia 1020

[STREETFIGHTER50]

Those are sick! Didn't realize gold spokes would look so nice with the grey! I dig it!

[johnrando]

Nice, congrats!

[WOLFN8TR]

Nice! Any rubbing with the rears? Fenders rolled?

[fantinno]

I haven't had any issues with rubbing yet, but I'm still at stock height. I was parked on an angle the other day that compressed the suspension down pretty far and it looked like I was right on the cusp of interfering with the inner lip on the fender, so I'll probably get them gently rolled before installing the race springs.

[TigerTater]

That looks great. I was looking at the oem m3 csl wheels but was curious if they would fit being 19's....anyone done this?


Sent from my iPhone 13

[fantinno]

That looks great. I was looking at the oem m3 csl wheels but was curious if they would fit being 19's....anyone done this?


Sent from my iPhone 13

Unfortunately they won't fit your 330 very well. For reference, I'm running a 19x10 @ ET41 in the rear, and I pretty much have no clearance to the inner fender lip. OEM CSL wheels are 19x9.5 ET22, so you'd be sticking 13mm (.5 in) further out than on my setup. You'd need some pretty drastic fender work and/or stretched tires to make them fit without major rubbing.

[TigerTater]

Unfortunately they won't fit your 330 very well. For reference, I'm running a 19x10 @ ET41 in the rear, and I pretty much have no clearance to the inner fender lip. OEM CSL wheels are 19x9.5 ET22, so you'd be sticking 13mm (.5 in) further out than on my setup. You'd need some pretty drastic fender work and/or stretched tires to make them fit without major rubbing.

Thanks. I really appreciate the insight! ...

[SoDelBMW]

I'm about to order new wheels and tires and am kinda confused on what wheel, tire setups fit and what all of the measurements mean? I'm think of getting 18x8.5 style 313's with the Michelin PS2, will I need spacers?