FS: LCM with Euro Fog Switch/Auto

[derbo]

Hey guys/gals

I have LCM from the UK.

-Auto headlights
-Euro Fog switch.
LCM version 3.01

http://i.imgur.com/KXLt1wvl.jpg

$120shipped takes it!

[cakM3]

Derek, I'm interested....calling dibs!

[derbo]

Pending to Charlie, again. LOL

[cakM3]

Yep! Thanks again Derek! :thumbsup ;)

[Hornung418]

Goddammit!

Sent from my GS3.

[cakM3]

Justin, I'm sure Derek will source another one....this time I won't be grabbing it though since I will have one for each car already ;) Just keep an eye out... I was lucky enough to find this one just a few minutes after Derek posted his "for sale" thread on this one :)

[derbo]

Goddammit!

Sent from my GS3.

If I find another one, I'll let you know :)

[NoVAphotog]

If I find another one, I'll let you know :)

Are the LCM's that support triple blink also made with the Euro fog switch? I'd be up for one if they do. ;)

[ELCID86]

The LCM and faceplate are independent. You need LCM with 4.xx+ to get triple-blink. Ebay UK or Germany are good sources if you can find someone willing to ship.

[derbo]

Are the LCM's that support triple blink also made with the Euro fog switch? I'd be up for one if they do. ;)


The LCM and faceplate are independent. You need LCM with 4.xx+ to get triple-blink. Ebay UK or Germany are good sources if you
can find someone willing to ship.

Shawn is right. You will need a LCM with a software revision of 4.0+ to have triple blink. The faceplate itself is detachable and can be used with any LCM version with auto.


Anyways,
Sold to Charrie. I shipped it about 5 minutes ago.

[cakM3]

to be more specific....any LCM with either s/w 4.0 or 4.5 will support one touch triple-blink. The LCM faceplate from the LCM I just purchased from Derek will replace the one on my s/w 4.0 LCM that's currently installed in my ZHP.

[NoVAphotog]

Thanks to all for the clarification!

Sent from my HTC6500LVW using Tapatalk

[johnrando]

So you really just want to the faceplate to go on your 4.x body?

[cakM3]

So you really just want to the faceplate to go on your 4.x body?

John, to answer your question... yes. I plan to retrofit the rain sensor windshield this year to my ZHP so that I can ultimately retrofit auto headlight/rain sensor onto my ZHP :thumbsup Another OEM option my poor ZHP was denied from the factory...

[Lanister]

I need a face plate for one those :)

[derbo]

So should I just find them and stockpile them then sell them? or just post them up and let you guys fight for it? :)

[cakM3]

So should I just find them and stockpile them then sell them? or just post them up and let you guys fight for it? :)

That would be more entertaining Derek :biggrin

[Hornung418]

Need a physical location...then a fight or some kind of physical endurance test where the faceplates are awarded to the winner.

Sent from my GS3.

[cakM3]

Need a physical location...then a fight or some kind of physical endurance test where the faceplates are awarded to the winner.

Sent from my GS3.

.....or you can be fast like me Justin and get one as soon as they are posted for sale :thumbsup Takes much less effort ;)

[Hornung418]

.....or you can be fast like me Justin and get one as soon as they are posted for sale :thumbsup Takes much less effort ;)

I was at work and I logged in on my brake. I was ten minutes slower than you. Has nothing to do with speed and more to do with working restrictions.

Sent from my GS3.

[cakM3]

I was at work and I logged in on my brake. I was ten minutes slower than you. Has nothing to do with speed and more to do with working restrictions.

Sent from my GS3.

Believe me....I'm well aware of work restrictions... I work inside a very secure lab environment... no personal computers or phones allowed....all I can say....

[derbo]

Sorry Justin. I'll post later next time ;)

Fight club? or a RACE?!

[Hornung418]

Both! Top two to reach the finish then have to fight to the death...

Sent from my GS3.

[cakM3]

:biggrin