PDA

View Full Version : FS: Genuine BMW Front Sway Bar End Links 31356780847



Imola.ZHP
03-31-2015, 02:22 PM
$OLD!


Hello!

Back in June of 2013 I ordered a front suspension refresh for my 2003 330i ZHP from ECS Tuning. Unfortunately I was too busy with school, work, homeownership, family, the better half, etc, etc, etc, and did not get the refresh done until early December of 2014. Crazy, right? Yeah, so immediately after installing the sway bar end links I purchased I knew they were not going to work, my ZHP has a Cup Kit on it and these were longer than the original ones I was replacing. Still, I thought I would try them out because I had them, and after the second week of them being on I ordered some adjustable aftermarket end-links. I was on vacation (by plane) the the 3rd week they were on the car and I swapped them out probably right at 4 weeks after putting them on. They are not damaged in anyway, they are still like new, ready to go on another e46. This car only is only driven 5k per year, so they have hardly any miles on them. Part number 31356780847. I am not sure what all e46's they will fit on, so be sure to do your research before committing to buy.

Link to ECS Tuning's website http://www.ecstuning.com/ES51181/ I paid $35.17 each, they are now $39.61 each. I didn't pay tax, but I did pay shipping as well.

Asking $50.00 (or best offer) with free shipping anywhere in the contiguous 48 states, they will come from Memphis, TN. Paypal works best for me Friends and Family will save fee's. If you PM me an offer please let me know your shipping info.

Thanks!


Pic's over on e46f http://forum.e46fanatics.com/showthread.php?p=16577938#post16577938

Imola.ZHP
04-05-2015, 11:12 AM
Bump, price drop, go OEM and save money!

ELCID86
04-05-2015, 12:09 PM
I may be interested.

Imola.ZHP
04-05-2015, 12:35 PM
^ Replied to PM and texted you as well.

Perhaps on ZHPmafia isn't the best place for these, I'm not sure if I ordered the wrong ones or what but they were actually just a tad longer than the ones I pulled off the car. I would hate for a ZHP owner to attempt to put these on a ZHP and have the same experience. I'm guessing they are for a sport or maybe even a non-sport e46.

ELCID86
04-05-2015, 12:37 PM
Thanks. I'm hoping to use with Coilovers so I guess I should go adjustable as you recommended.


Thumbs, iPhone, Tapatalk.

Imola.ZHP
05-07-2015, 03:08 PM
Bump, any non-ZHP e46 owners out there need some new end-links?

Oli77
05-07-2015, 03:58 PM
Sorry man, ZSP owner over here but replaced mine last year.

Imola.ZHP
05-07-2015, 04:00 PM
Sorry man, ZSP owner over here but replaced mine last year.

Darn!

az3579
05-08-2015, 06:28 AM
RealOEM shows only one part number regardless of sport or non-sport...
I need these but... car payment and health insurance is due. F#$%ing health insurance...

Imola.ZHP
05-08-2015, 06:52 AM
RealOEM shows only one part number regardless of sport or non-sport...
I need these but... car payment and health insurance is due. F#$%ing health insurance...

I tried to put them on my ZHP with an H&R Sport Cup kit and they were longer than the ones that came off the car. If your needing them for another car, then check back with me next month, maybe you'll have the funds and maybe I'll still have them.

Thanks!!

az3579
05-08-2015, 07:44 AM
I tried to put them on my ZHP with an H&R Sport Cup kit and they were longer than the ones that came off the car. If your needing them for another car, then check back with me next month, maybe you'll have the funds and maybe I'll still have them.

Thanks!!
When I had replaced them 4 years ago, the factory part number fit just fine. I also have the sport cup kit ...

Imola.ZHP
05-08-2015, 08:44 AM
When I had replaced them 4 years ago, the factory part number fit just fine. I also have the sport cup kit ...

Maybe something changed from 2003 to 2005? I ended up removing them and going adjustable.

Odd, I might have been able to have already moved them if they do indeed fit a ZHP, even a later ZHP, properly.

az3579
05-08-2015, 08:56 AM
Who knows. For this reason I think I'll pass, since we're not certain if it'll fit. :(

Imola.ZHP
05-08-2015, 09:51 AM
Who knows. For this reason I think I'll pass, since we're not certain if it'll fit. :(

10-4, would hate for you to get stuck with them.

itdnwiwbp
05-09-2015, 02:08 AM
Tischer confirmed for me last week that this is the correct part number for our ZHPs. If anyone needs front end links these are the ones. "Hey Tony, thanks for your interest – yes, the 31356780847’s are correct for all 330i sedans. The ZHP model did not get upgraded sway bar links. The part # is the same for both sides as well, so you would need to order 2."

Imola.ZHP
05-09-2015, 02:29 AM
Tischer confirmed for me last week that this is the correct part number for our ZHPs. If anyone needs front end links these are the ones. "Hey Tony, thanks for your interest – yes, the 31356780847’s are correct for all 330i sedans. The ZHP model did not get upgraded sway bar links. The part # is the same for both sides as well, so you would need to order 2."

Thanks for your help!

ItsMeScottG
05-09-2015, 09:41 AM
Oddly enough Bmw redesigned the front sway bar end links for our cars.

My original Bmw sway bar end links look slightly different from the new ones I installed yesterday. The new ones were also genuine Bmw front sway bar end links that I bought from my local dealership via vin number.

Same concept of course, just a slightly different design.

az3579
05-09-2015, 10:28 AM
I posted it in the other thread but I'll post it here too so my OCD is satisfied. :)

I'll take them. Please PM me PayPal.

Imola.ZHP
05-09-2015, 11:33 AM
I posted it in the other thread but I'll post it here too so my OCD is satisfied. :)

I'll take them. Please PM me PayPal.

PM SENT!

Thanks everybody for the help!

Imola.ZHP
05-09-2015, 09:19 PM
$OLD! Thanks BP!

az3579
05-09-2015, 10:36 PM
Thank YOU, Marcus. :thumbsup