Paying it Forward...

[04330i]

PM sent. Thank you Sir!

[fredo]

I'll take #4 ! Will PM you my address. Thanks !

[cakM3]

I've got a few freebies that I scored at Sebring this weekend... There really wasn't much (I was quite disappointed by the lack of free swag at the event), but the things I grabbed are up for grabs... :shifty

1. Continental Tires hat
2. Continental lanyard
3. SRT messenger bag/backpack
4. Mazda cell phone thingie... It has double sided tape on the back... You stick it to the back of your phone and you can put money/cards in it I guess... ?!?!

Free to the masses... Just pay shipping!

http://i88.photobucket.com/albums/k166/jdinisio/IMG_2498.jpg (http://s88.photobucket.com/user/jdinisio/media/IMG_2498.jpg.html)

Jon,

If the SRT messenger bag/backpack isn't taken I'll take it :thumbsup

Just PM me your address and how much it will cost to ship to my address (located in member's contact thread)... thanks!

[JupiterBMW]

Ok, all items have been claimed! Shipping this afternoon or tomorrow. Thanks gents!


iPhone 5S. Tapatalk Pro. BOOM

[04330i]

I've got the center console cup holders and coin holder that are a bit rough that I replaced with new ones. If you'd like them, PM me with your address. Free plus shipping. They are gray in color and are out of a 330i.

Pic:
http://img.tapatalk.com/d/14/03/19/uja7a2ab.jpg

Sent from my Note 3 using Tapatalk Pro

[04330i]

Added a pic ^^^^^

Sent from my Note 3 using Tapatalk Pro

[QC_ZHP]

Does anyone have a fog light cover? My driver's side went MIA. Willing to pay for it, just thought I'd post in here.

[rguti153]

I have extra not sure what side need to look

Sent from my SCH-I545 using Tapatalk 2

[QC_ZHP]

Schweet, thanks for posting. Let me know

[danewilson77]

I have extra not sure what side need to look

Sent from my SCH-I545 using Tapatalk 2

+1

I'll check as well.

Sent from my SCH-I545 using Tapatalk

[04330i]

Does anyone have a fog light cover? My driver's side went MIA. Willing to pay for it, just thought I'd post in here.

Is it the plastic cover for a ZSP? If so, I have an extra.

Sent from my Note 3 using Tapatalk Pro

[ELCID86]

Does anyone have a fog light cover? My driver's side went MIA. Willing to pay for it, just thought I'd post in here.

Those things are a PITA. I'm missing one on each car (right side too, I'm pretty sure).

[QC_ZHP]

+1

I'll check as well.

Sent from my SCH-I545 using Tapatalk

Much appreciated.


Is it the plastic cover for a ZSP? If so, I have an extra.

Sent from my Note 3 using Tapatalk Pro

Round fog lights?


Those things are a PITA. I'm missing one on each car (right side too, I'm pretty sure).

Lol, glad I'm not the only one. I just noticed it when I replaced the fog bulbs this weekend.

[04330i]

Round fog lights?


Yes sir. Are your fogs like the one in the pic?
http://img.tapatalk.com/d/14/03/25/daqusu5u.jpg

Sent from my Note 3 using Tapatalk Pro

[gmurphy]

Yes sir. Are your fogs like the one in the pic?
http://img.tapatalk.com/d/14/03/25/daqusu5u.jpg

Sent from my Note 3 using Tapatalk Pro

No they are like this http://img.tapatalk.com/d/14/03/25/ebydymaz.jpg
http://img.tapatalk.com/d/14/03/25/ha7uje9a.jpg


Sent from my iPhone using Tapatalk

[04330i]

No they are like this http://img.tapatalk.com/d/14/03/25/ebydymaz.jpg
http://img.tapatalk.com/d/14/03/25/ha7uje9a.jpg


Sent from my iPhone using Tapatalk

Oh, darn. Sorry, don't have that size :(

Sent from my Note 3 using Tapatalk Pro

[gmurphy]

Yes sir. Are your fogs like the one in the pic?
http://img.tapatalk.com/d/14/03/25/daqusu5u.jpg

Sent from my Note 3 using Tapatalk Pro

The color of your car is really awesome! (Off topic but just saying..)


Sent from my iPhone using Tapatalk

[04330i]

Thanks!

Sent from my Note 3 using Tapatalk Pro

[ELCID86]

Much appreciated.



Round fog lights?



Lol, glad I'm not the only one. I just noticed it when I replaced the fog bulbs this weekend.

I bought a set of these, but have not painted/installed them yet. They come in a grey primer color. I think I'll paint them black.

http://www.khoalty.com/bmw-e46-hamann-style-fog-cover.html

[QC_ZHP]

I bought a set of these, but have not painted/installed them yet. They come in a grey primer color. I think I'll paint them black.

http://www.khoalty.com/bmw-e46-hamann-style-fog-cover.html

Nice, thanks for the link. A little more than I want to spend right now, though. I have tires and brakes to purchase soon so hopefully I can source someone's old one for cheap. I plan on painting both of mine Matte Black to match my kidneys........and my faded trim :facepalm

[Imola.ZHP]

I was up in my attic yesterday putting some winter "equipment" up. I'm going to have a hay-day in here when I get a chance to bring down some car parts that I have carried from house to house over the past nearly 8 years.

[Avetiso]

Any old shift boss boots? Still looking for the ring.

Sent from my SM-N900T using Tapatalk

[Imola.ZHP]

Any old shift boss boots? Still looking for the ring.

Sent from my SM-N900T using Tapatalk

Me? Nope, sorry, I haven't replaced the shift box boot. Full set of OEM lights though, which were glaring at me through their bubble wrapped packages, front and rear ash tray's, other stuff too I can't seem to remember right now.

Was going to hold onto the stuff to return the car to "stock" if ever sold. Car isn't worth anything, so I'll just keep it forever, time to unload that stuff when I get up there for some spring cleaning.

Love the sig pic BTW.

[cakM3]

Ok, all items have been claimed! Shipping this afternoon or tomorrow. Thanks gents!


iPhone 5S. Tapatalk Pro. BOOM

Your package arrived today, thanks Jon! :thumbsup

[Vas]

Curious to see what you have Marcus.

[JupiterBMW]

Ok folks, a few other items...

1. A tailpipe expander (for doing custom exhaust). This is a brand new Craftsman tool in packaging.

2. A universal oil filter removal tool... Adapts onto a 3/8" ratchet, also new.

3. OEM intake boots (upper and lower), excellent shape, 22K miles (includes F connector)

Lemme know asap!

[Imola.ZHP]

^ not the place for it, but holy shite that is a nice sig pic!

[QC_ZHP]

Anyone find out if they had a driver's side fog cover?

[danewilson77]

Sorry. I only have right side.

Sent from my SCH-I545 using Tapatalk

[ELCID86]

Sorry. I only have right side.

Sent from my SCH-I545 using Tapatalk

Same here. On both cars :-(


Thumbs, iPhone, Tapatalk.

[rguti153]

Fuck forgot to check ...... will check today

Sent from my SCH-I545 using Tapatalk 2

[QC_ZHP]

No worries guys, I appreciate you looking

[rguti153]

Just remember to check . I have left and right but they r aftermaket ,came with ebay fog lights . If I remember correctly, I think I didnt put them on because they were kinda loose

Sent from my SCH-I545 using Tapatalk

[QC_ZHP]

^Thanks for checking. I'll just pick up a new set.

I have a steering coupler I just took off if anyone is planning on picking up a poly bushing for theirs. You can build it before install, may make things a little easier.

[Tnhl1989]

I also have a steering guibo if anyone plan on doing any other install as well.

[Pip]

I have a water pump for the zhp. It is an off brand (Uro) so never installed it in my old zhp.

I also noticed the Stewart pump for ~$175-180 on autohausaz which seemed like a decent deal considering the OEM part price.

[Imola.ZHP]

^Thanks for checking. I'll just pick up a new set.

I have a steering coupler I just took off if anyone is planning on picking up a poly bushing for theirs. You can build it before install, may make things a little easier.

I didn't realize they made poly kits for those. I threw mine away when I changed it out. D'OH!

------------

Anyone have a spare drivers-side clubsport splitter by chance?

[Whammy]

Anyone find out if they had a driver's side fog cover?

I think I have it if you still need it. I will be able to check on Monday.

[Whammy]

I have a water pump for the zhp. It is an off brand (Uro) so never installed it in my old zhp.

I also noticed the Stewart pump for ~$175-180 on autohausaz which seemed like a decent deal considering the OEM part price.

Crap. I just ordered the uro from ecs.

[Avetiso]

Crap. I just ordered the uro from ecs.

Cancel it?

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

[WOLFN8TR]

Anyone find out if they had a driver's side fog cover?

Check these out, $13 shipped for both sides!

http://www.ebay.com/itm/170655754608?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[ZHPurrr]

Offered: Mounting Bracket for OEM Bluetooth Control Unit for your e46. New in box from ECS. Part # 84 13 6 924 551

Got an extra when I bought my TCU on ebay it came with the bracket. Retails for 12 bucks plus shipping. If you are doing OEM bluetooth retrofit (as in this excellent thread) (http://www.zhpmafia.com/forums/showthread.php?1654-DIY-OEM-Bluetooth-Retrofit-doityourself) you'll need one.

Free pickup in Seattle or pay shipping and I'll send it to you.

[QC_ZHP]

Check these out, $13 shipped for both sides!

http://www.ebay.com/itm/170655754608?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Awesome. Thanks for the link...that price is great.

[ELCID86]

Awesome. Thanks for the link...that price is great.

Be careful on the eBay fog covers. I ordered a pair and they would both latch into place. Seller did refund my money and didn't ask for them to be returned. I'd have to look at the seller's name later.


Thumbs, iPhone, Tapatalk.

[ELCID86]

Be careful on the eBay fog covers. I ordered a pair and they would both latch into place. Seller did refund my money and didn't ask for them to be returned. I'd have to look at the seller's name later.


Thumbs, iPhone, Tapatalk.

I got mine from "super nation". Maybe you will have better fitment. Let us know. http://www.ebay.com/itm/140803886721?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

[Whammy]

Cancel it?

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
Sent you a pm.

[Pip]

Whammy let me know. Sent PM back and it only costs shipping.

I'm looking for a OEM jack so if anyone has one or know where I can get one for cheap I'd love it.

[ELCID86]

Awesome. Thanks for the link...that price is great.

Did anyone try these?


Thumbs, iPhone, Tapatalk.

[QC_ZHP]

Whammy just PMed me about an extra he had so I didn't. The price is good enough to give them a shot if your in need though it seems.

[ELCID86]

I still need one for the right side.


Thumbs, iPhone, Tapatalk.

[Whammy]

Whammy just PMed me about an extra he had so I didn't. The price is good enough to give them a shot if your in need though it seems.

Replied back!

[ZHPLove]

Offered: Mounting Bracket for OEM Bluetooth Control Unit for your e46. New in box from ECS. Part # 84 13 6 924 551

Got an extra when I bought my TCU on ebay it came with the bracket. Retails for 12 bucks plus shipping. If you are doing OEM bluetooth retrofit (as in this excellent thread) (http://www.zhpmafia.com/forums/showthread.php?1654-DIY-OEM-Bluetooth-Retrofit-doityourself) you'll need one.

Free pickup in Seattle or pay shipping and I'll send it to you.


I will be doing that too. Since I am also in Seattle, I will let you know if I need the part :)

[HockeyGoon]

Free bracket , no shipping fees , absolutely free to you. This is a bracket out of my 2005 330ci and it has the smokers package in it. It has scratches and minor damage to the 12volt clip, not going to lie about it but I would rather give it to someone than throw it away
http://img.tapatalk.com/d/14/05/20/myry3e7e.jpg
http://img.tapatalk.com/d/14/05/20/guga2ata.jpg
http://img.tapatalk.com/d/14/05/20/ujyqyjas.jpg
http://img.tapatalk.com/d/14/05/20/epu5ejyp.jpg
First come , first serve

[bloodspatteranalyst]

http://i.imgur.com/2bGkWEg.jpg

Free rear view mirror housing left side only. Just pay shipping and it's yours.

[WOLFN8TR]

Free rear view mirror housing left side only. Just pay shipping and it's yours.

What is the Part # on the back?

[bloodspatteranalyst]

What is the Part # on the back?

It's this product http://www.ecstuning.com/BMW-E46-330Ci-M54_3.0L/Interior/Mirror/Trim/ES87371/

[WOLFN8TR]

Bump...

[JupiterBMW]

I have a couple of LCMs. One has SW 3.6 and the other has SW 3.56. These will NOT work for triple blink, but they will work for other features.

One of the faceplates has the auto feature, the other does not. I can swap them around as you'd like..

Just pay shipping.

[Whammy]

I have a couple of LCMs. One has SW 3.6 and the other has SW 3.56. These will NOT work for triple blink, but they will work for other features.

One of the faceplates has the auto feature, the other does not. I can swap them around as you'd like..

Just pay shipping.

Sent a pm Jon.

[Whammy]

If anyone need the torx tensioner bolt, I have two. Free to a good home.

[TWong1200]

Set of factory corners for Sedan. Small chip on driver's corner. See pic. Pay shipping and they're yours. Come with bulbs and sockets.
http://tapatalk.imageshack.com/v2/14/10/31/65aa4c98beed7ff9e837145a52de5430.jpg

http://tapatalk.imageshack.com/v2/14/10/31/9d1466a4648226b7d73219f9351758a8.jpg

[poke08]

Pm'd ^

[Imola.ZHP]

Anyone have an extra foglight surround? Passenger side, I have no idea where I lost it.

[Vas]

Send me a pm. I got them

[Crickett]

After refreshing my OEM suspension, I have a few leftover bits that I thought someone might get some use from. As per usual, everything is available for the cost of shipping.

Brand-new, never used Lemförder OEM rear 18-mm swaybar bushings (didn’t realize I ordered two sets)

http://tcholo.net/images/bmw/20141207spares_swaybushing18mm.jpg

Used (130k mi) original LCABs: bushings are toast, but the brackets are solid

http://tcholo.net/images/bmw/20141207spares_LCABs.jpg

Rear original shock mounts; again, 130k mi on them, but they look like they’re in surprisingly good condition: rubber’s not cracked, ripped, rotted, etc.

http://tcholo.net/images/bmw/20141207spares_rearMounts.jpg

Front original spring hats (130k mi)

http://tcholo.net/images/bmw/20141207spares_frontSpringHats.jpg

Front springs: one OE ZHP (on the right; was marked red/white before it rubbed off), one presumed sport-package (on the left; unmarked)

http://tcholo.net/images/bmw/20141207spares_frontSprings.jpg

One used front endlink, Lemförder OEM

http://tcholo.net/images/bmw/20141207spares_frontEndlink.jpg

I’ll hold on to these for a few weeks, so if anyone wants them, let me know!

[BimmerWill]

Do the sway bar bushings fit a standard 330 as well as the zhp models?

[alexandre]

I'll take the rear sway bar bushings if Will doesn't.

[BimmerWill]

I'm interested if they will fit. If not you're more than welcome to them alexandre.

[Crickett]

Do the sway bar bushings fit a standard 330 as well as the zhp models?

It does; the rear swaybar on the ZHP is the same as the standard 330i: 18 mm.

[BimmerWill]

It does; the rear swaybar on the ZHP is the same as the standard 330i: 18 mm.
Sweet thanks. Sending PM.

[Vas]

I will take the front lcab lollipops.

[fredo]

Travis, just curious ... when did you refresh the suspension ? I drove your car in July of last year and didn't notice any issues.

[Crickett]

I will take the front lcab lollipops.

All yours, Vas! I'll shoot you a PM.


Travis, just curious ... when did you refresh the suspension ? I drove your car in July of last year and didn't notice any issues.

Fredo, I just did the refresh two weeks ago; she wasn't behaving badly at all, just suspected it was time at 130k. And I was apparently right: both of my rear shocks were collapsed and leaking.

[WOLFN8TR]

Paying it Forward Police style!



http://www.youtube.com/watch?v=mlnxajQrL8w

[danewilson77]

Awesome

"No flamesuit required"

[Imola.ZHP]

Still looking for a passenger side fog light surround if anyone has one.

Thanks!


--Marcus

[ELCID86]

Does anyone have a used working coil pack I can borrow? Happy to pay shipping both ways.


Thumbs, iPhone, Tapatalk.

[danewilson77]

Does anyone have a used working coil pack I can borrow? Happy to pay shipping both ways.


Thumbs, iPhone, Tapatalk.
I think I do Shawn. I'll check when I get home.

"No flamesuit required"

[ELCID86]

I think I do Shawn. I'll check when I get home.

"No flamesuit required"
Thanks Dane!

[Imola.ZHP]

Still looking for a passenger side fog light surround if anyone has one.

Thanks!


--Marcus



Thanks Vas for the fog light surrounds! The one that was missing helps keep the foglight it surrounds better leveled due to my front bumper having a crack in it (long story short, I was single a few years back, did a lot of party'ing hit a milk-crate while texting and driving, cracked the bumper, its not very noticeable, but I know its there).

I need to crawl up in the attic and bring a few things down now so I can pay if forward!

[Vas]

Glad to hear.

[ELCID86]

Does anyone have a used working coil pack I can borrow? Happy to pay shipping both ways.


Thumbs, iPhone, Tapatalk.

I'm still looking for one (or more).


Thumbs, iPhone, Tapatalk.

[Vas]

Does anybody have an F-Connector for the intake boots in good condition? I know its a cheap but don't want to pay more in shipping then the actual price of the part.

[WOLFN8TR]

I might have one, I will go look and see.

[Crickett]

Does anybody have an F-Connector for the intake boots in good condition? I know its a cheap but don't want to pay more in shipping then the actual price of the part.


I might have one, I will go look and see.

Ditto; I can double-check when I get home.

[WOLFN8TR]

I might have one, I will go look and see.

Sorry I do not.

[Crickett]

Does anybody have an F-Connector for the intake boots in good condition? I know its a cheap but don't want to pay more in shipping then the actual price of the part.

I’ve got one! I’ll have it in the mail tomorrow to your address in the Members Only thread!

[Vas]

I’ve got one! I’ll have it in the mail tomorrow to your address in the Members Only thread!
Dude that is awesome. Thanks man

[Whammy]

Anyone have the drivers side kidney grill in black? Mine will not stay together. Somehow one of the clips broke. PM me what you have.

[Just_George]

Long shot, but hopefully somebody can benefit from my screw-up. Not long ago, I ordered a set of black grills from Bimmian (of their 'scratch & dent' sale page, although I can't find a defect!) I swear it said they were for an E46, but either I didn't look closely enough or missed something, 'cause they don't fit my '03 ZHP sedan OR my '04 330Ci. The grills I got are significantly narrower than what's required for my cars - maybe they are for pre-facelift cars?

In any case, I can't use them - if anyone out there CAN use them, they're yours for the cost of shipping. I can take measurements if needed to verify fit.

[ELCID86]

Long shot, but hopefully somebody can benefit from my screw-up. Not long ago, I ordered a set of black grills from Bimmian (of their 'scratch & dent' sale page, although I can't find a defect!) I swear it said they were for an E46, but either I didn't look closely enough or missed something, 'cause they don't fit my '03 ZHP sedan OR my '04 330Ci. The grills I got are significantly narrower than what's required for my cars - maybe they are for pre-facelift cars?

In any case, I can't use them - if anyone out there CAN use them, they're yours for the cost of shipping. I can take measurements if needed to verify fit.

Can't return/swap them?


Thumbs, iPhone, Tapatalk.

[Just_George]

Nope, were a 'clearance/as-is' item. They weren't terribly expensive, so I don't feel real bad about it...just would like to find somebody who could use them!

[hcbeck2689]

I like the idea of this thread.

I got a $15 iTunes card. Who wants it?


Sent from my iPhone using Tapatalk

[poke08]

I like the idea of this thread.

I got a $15 iTunes card. Who wants it?


Sent from my iPhone using Tapatalk

Nice contribute. I'll take it :thumbup

[hcbeck2689]

Nice contribute. I'll take it :thumbup

Pm sent


Sent from my iPhone using Tapatalk

[az3579]

Purolator air filter for stock intakes. Brand new, never used. Pay shipping and it's yours!

19708

[Just_George]

Will take the air filter...tell me what shipping to 48197 will be or, if you'd rather, just bring it to the reunion.

[JB3]

I will take the front lcab lollipops.

Yo Vas, if you press some poly bushings into this, are you going to pay-it-forward for your old ones? If so, someone may be willing to do the same. Rinse, repeat.

Honestly I'm just asking, I have no idea yet if mine have been done, I need to get it up on a lift. I just thought that would be a cool idea, kinda like the fender roller. :cheers

[cakM3]

For those going to the reunion meet. I have an LCM coded for sw 4.5 I will forward to Dane as a pay it forward item Dane will present to someone. Just wanted to post this :thumbsup It does not have a faceplate but that's easy because the recipient can transfer their face plate from their existing LCM to this one...

[ELCID86]

Very nice Charlie. Maybe to the winner of the rally!


Thumbs, iPhone, Tapatalk.

[cakM3]

Very nice Charlie. Maybe to the winner of the rally!


Thumbs, iPhone, Tapatalk.

Thanks Shawn! However Dane chooses is fine with me :thumbsup

[Vas]

Yo Vas, if you press some poly bushings into this, are you going to pay-it-forward for your old ones? If so, someone may be willing to do the same. Rinse, repeat.

Honestly I'm just asking, I have no idea yet if mine have been done, I need to get it up on a lift. I just thought that would be a cool idea, kinda like the fender roller. :cheers
Good idea.

[smacame]

I recently replaced my compact spare with a full size spare (thanks for the pointers on sizing and stuff guys!), so now I have a compact spare that is looking for a new home. It looks brand new and holds air. I'm in Santa Cruz, CA and I travel around the bay area and California at large often, let me know if you want it! I'd also ship it if someone wants to cover that expense.

[ELCID86]

I recently replaced my compact spare with a full size spare (thanks for the pointers on sizing and stuff guys!), so now I have a compact spare that is looking for a new home. It looks brand new and holds air. I'm in Santa Cruz, CA and I travel around the bay area and California at large often, let me know if you want it! I'd also ship it if someone wants to cover that expense.

What'd you find for a suitable spare? The one I tried wouldn't allow the trunk panel to lay flat.


Thumbs, iPhone, Tapatalk.

[smacame]

My trunk panel does not lie entirely flat now, but it's less than half an inch too high so I'll live with it. I bought a single 18x8 style 135 on eBay and got a Michelin pilot sport a/s 3 for $60 to go with it. That particular tire has a really substantial ridge near the rim which is a little wider than the wheel itself. I bet with a more conventional sidewalled tire it'd be a perfect fit in the wheel well.

[smacame]

Edit - accidental double post :facepalm

[ELCID86]

My trunk panel does not lie entirely flat now, but it's less than half an inch too high so I'll live with it. I bought a single 18x8 style 135 on eBay and got a Michelin pilot sport a/s 3 for $60 to go with it. That particular tire has a really substantial ridge near the rim which is a little wider than the wheel itself. I bet with a more conventional sidewalled tire it'd be a perfect fit in the wheel well.

I tried a wheel that didn't allow the panel to lie flush. I'm still searching...


Thumbs, iPhone, Tapatalk.

[rguti153]

I tried a wheel that didn't allow the panel to lie flush. I'm still searching...


Thumbs, iPhone, Tapatalk.
I need to figure this out too

[fredo]

I'm ok with the donut in the trunk. When I sell the e90 I plan to keep its full size spare for the ZHP.

[rguti153]

What rims fit that r 18 ?

[fredo]

My trunk panel does not lie entirely flat now, but it's less than half an inch too high so I'll live with it. I bought a single 18x8 style 135 on eBay and got a Michelin pilot sport a/s 3 for $60 to go with it. That particular tire has a really substantial ridge near the rim which is a little wider than the wheel itself. I bet with a more conventional sidewalled tire it'd be a perfect fit in the wheel well.

Ebay has Michelin tires for $60 ? In good shape ?

[fredo]

What rims fit that r 18 ?

The e90 has sports package. I found an used OEM wheel style 162 (front size) on ebay. I'm pretty sure style 162 and 135 are compatible, but I didn't verify.

[smacame]

Ebay has Michelin tires for $60 ? In good shape ?

Looking back it was actually $70 for the one Michelin Pilot Sport a/s 3. I'd be pretty happy with four of them to make a set.

[Imola.ZHP]

There are some freebies (just pay for shipping) in my second part-out thread.

http://www.zhpmafia.com/forums/showthread.php?16046-Part-Out-Thread-2-(Lighting-Maintenance-Accessories-Etc)

[Imola.ZHP]

Reduced some more stuff to "$0, Just pay shipping!" in my part out thread, check it out if you haven't already.

http://www.zhpmafia.com/forums/showthread.php?16046-Part-Out-Thread-2-(Lighting-Maintenance-Accessories-Etc)

[az3579]

Will take the air filter...tell me what shipping to 48197 will be or, if you'd rather, just bring it to the reunion.

Oops, forgot to respond to you...
I'll bring it to the reunion. :thumbsup

Come find Wobz and I'll give it to you.

[NorCal-Dimitri]

Does anyone have a hood roundel laying that isn't in crap condition? The sun beat mine up pretty badly.

[slater]

Does anyone have a hood roundel laying that isn't in crap condition? The sun beat mine up pretty badly.

i picked up a good used one on ebay for $10 shipped...

[fredo]

I bought a new one on ebay for $7. The ad had an OEM part number and the "original" word in it. But it seems to be a knock off. The seller is located in USA, another factor for my mistake. Don't let this happen to you !

From my past experience: the knock off roundels look nice in the beginning, but they will fade quickly under the sun.

[NorCal-Dimitri]

Well I guess I'll stay away from eBay. I guess I'll just search around for the best price on an OEM roundel.

[BCS_ZHP]

My son, Brett, sent a little pay forward for help Charlie administered to his car over the last 2 years, hope you like it Charlie.

[cakM3]

My son, Brett, sent a little pay forward for help Charlie administered to his car over the last 2 years, hope you like it Charlie.

Damn Bruce!!! I'm starting to feel like it's a little bit like Christmas! I don't know what else to say but thanks!!! :thumbsup :biggrin

I'm assuming I should apply this item towards my ZHP....am I correct?

[BCS_ZHP]

Apply it wherever you decide, but with only one item you've got a though choice to make.

[cakM3]

Apply it wherever you decide, but with only one item you've got a though choice to make.

Again....you and Brett have my most sincere thanks! :cheers

I think I will take Monday off from work...

[BCS_ZHP]

I'm guessing you'll be waiting by the mailbox tomorrow afternoon, like a 5 year old waiting for Santa, and as you should be, hehe...

[cakM3]

I'm guessing you'll be waiting by the mailbox tomorrow afternoon, like a 5 year old waiting for Santa, and as you should be, hehe...

nice!! My postal carrier arrives in the morning :p I may be able to work half a day....nothing better than sleeping in then get the mail after having a nice breakfast then go to work ;) At least this way your package will have arrived and is inside my apartment ;)

[BCS_ZHP]

Well, maybe take the afternoon off so you can install it....

[BCS_ZHP]

IIRC, the box measured 14" x 10" x 9", and was heavy.

[Vas]

What is it what is it

[BCS_ZHP]

Supposed to be a tease for Charlie, is it working???

[cakM3]

Supposed to be a tease for Charlie, is it working???

One word.... there's a song that goes with this word, do you remember it?

A N T I C I P A T I O N

;)


Sent from my iPhone5S using Tapatalk

[fredo]

Charlie, no news ? I guess the box arrives this Monday then.

[cakM3]

Charlie, no news ? I guess the box arrives this Monday then.

Hey fredo! I'm in Utica, NY with BP at the moment meeting up with Peter so we can install Peter's ZHP front heated lumbar seats into my ZHP so I'll just have to wait until Monday to see just what Bruce and Brett sent me ;)


Sent from my iPhone5S using Tapatalk

[fredo]

Roger that!

[Dylanj17]

I just replaced my FCAB's so my old lollipops are chilling in the garage. Definitely will need a press tool to get the old ones out but could save some money by only buying the bushings. Anyone interested?

[ClimRox]

I have a new, never used, coolant temp. sensor. I ordered a Genuine part, but was sent an FAE OE supplier part. If you want it, it is yours for the cost of shipping.

20270

[kelderman295]

I have a used but fairly decent DISA that I replaced during preventative maintenance if anyone needs a core towards a GAS unit or wants to upgrade it. Pm me if you're in need!

[NoVAphotog]

I have a used but fairly decent DISA that I replaced during preventative maintenance if anyone needs a core towards a GAS unit or wants to upgrade it. Pm me if you're in need!
@Elcid86

Sent from an HTC One

[Just_George]

I'll take it if Elcid86 doesn't...


I have a used but fairly decent DISA that I replaced during preventative maintenance if anyone needs a core towards a GAS unit or wants to upgrade it. Pm me if you're in need!

[squashman702]

Third in line?

EDIT: Also willing to give up my old one (which is still good as far as I know) for the next person that wants to rebuild theirs.

[kelderman295]

First person to pm me will get it lol. Have yet to receive anything. I would definitely use it as a core or upgrade material rather than slap it in and go, but it should be good regardless.

[ELCID86]

I'll take it if Elcid86 doesn't...

Thanks Dan. David, go for it. My cars are running great.


Thumbs, iPhone, Tapatalk.

[kelderman295]

Messaged you back just_george!

[QC_ZHP]

Anyone have a spare set of kidney grilles?

[ZHP Dave]

I think I have the OEM ones in the garage. I can check in a bit.

[QC_ZHP]

I think I have the OEM ones in the garage. I can check in a bit.

Perfect. Let me know!

[ZHP Dave]

Well crap. I just checked and I guess I either threw them away or gave them to a friend. Sorry.

[QC_ZHP]

No worries, just looking to replace a broken set. I'm sure I'll find some. I appreciate you checking though.

[Avetiso]

Hm... how about a set of kidney grills for an M3 or prefacelift coupe?

[Pip]

Hm... how about a set of kidney grills for an M3 or prefacelift coupe?

You looking for grills? I might have my old set.

[Avetiso]

You looking for grills? I might have my old set.

Yup. Got some crappy paint matched ones that don't even sit straight.


Sent from my iPhone using Tapatalk

[Vas]

Going through my spare parts bin and had these in there.

Silver cube trim center piece and LCM piece.

Center piece is for coupes/vents. LCM fits all cars.

Anybody want them?

http://images.tapatalk-cdn.com/15/11/14/b9df58989913f3008e1f5e47700a349c.jpg

[wsmeyer]

I have a water pump I replaced at 55k as preventative maintenance. Has zero play in the bearings and gauging by the slight turning resistance the seals appear to be in good shape. If someone wants it $8 to cover shipping.

[hcbeck2689]

Going through my spare parts bin and had these in there.

Silver cube trim center piece and LCM piece.

Center piece is for coupes/vents. LCM fits all cars.

Anybody want them?

http://images.tapatalk-cdn.com/15/11/14/b9df58989913f3008e1f5e47700a349c.jpg

I'll scoop the radio piece, think that is center. Mine is bent from probably from some idiot trying to pry it off before removing right piece


-Holden

[az3579]

I'll scoop the radio piece, think that is center. Mine is bent from probably from some idiot trying to pry it off before removing right piece


-Holden


Sorry Holden, that's not a center piece that goes over the radio. That's the piece that goes over the light switch...
I need the center radio piece as well. :(

[Vas]

Correct. That is the piece above the LCM

[Boca_RatonZHP]

Hey everybody.

I'm down in Boca Raton this weekend visiting my family and was cruising around in my garage and found some extras.


I have a lower radiator hose for a 05 ZHP Vert, never been touched. I always kept a spare in my car so I guess I have two spares so I'll get rid of one
22597

22598

22599



I also have a right side fog light looking to get rid of if anyone needs one. It might need a new bulb, but its brand spankin new

226002260122602


Just cover shipping costs from 33498

[Vas]

Pm sent about the fog

[Johnmadd]

If Vas doesn't take the fog I will. :)

[Just_George]

I'm in for the lower rad hose - let me know how much you need for shipping and I'll send it out right away (Paypal?)

Thanks!

[bimmergofast]

Bah- too slow. I've got a cracked right fog too!

[Vas]

Bah- too slow. I've got a cracked right fog too!
So does the wife's car. Got an inspection coming up too on it

[Boca_RatonZHP]

Vas has dibs on the fog light.


I'm in for the lower rad hose - let me know how much you need for shipping and I'll send it out right away (Paypal?)

Thanks!

PM me your zip code, and yes paypal will do.

[Vas]

Vas has dibs on the fog light.



PM me your zip code, and yes paypal will do.
Yup. Sent you a pm. Thanks

[quikryptonite]

I've got a cracked right fog as well. :crying

[Boca_RatonZHP]

I've got a cracked right fog as well. :crying

All items claimed.

Sorry who missed out.


Sent from my iPhone using Tapatalk

[Snuffalufigus]

I just bought two new smoked foglights to replace mine. My left was cracked but my right side is fine. Free to a good home...

[Johnmadd]

I just bought two new smoked foglights to replace mine. My left was cracked but my right side is fine. Free to a good home...

I'll take it sir.

[Johnmadd]

Pm inbound.

[quikryptonite]

Ha, I missed it again. :)

[Snuffalufigus]

The free right passenger side fog light is still available :) However it is fluted. Would this be a problem?

[Vas]

I still have the silver cube trim for the shifter as well.

[hcbeck2689]

I still have the silver cube trim for the shifter as well.

I thought that's what you were sending me!?


-Holden

[Snuffalufigus]

Also here soon I am swapping out the automatic gear shifter and e-brake for aluminum bmw ones. Are those items I should be selling or just give 'em away?

[quikryptonite]

The free right passenger side fog light is still available :) However it is fluted. Would this be a problem?

I've currently got fluted right now, so no problem for me. You sure you don't want a few bucks for it? At least for the shipping, maybe for a cold beverage too?

[Snuffalufigus]

I've currently got fluted right now, so no problem for me. You sure you don't want a few bucks for it? At least for the shipping, maybe for a cold beverage too?

I would appreciate some shipping money :)

[Pip]

Not car related but if anyone has any interest in a OnePlus 2 PM me for an invite code. Good for 7 days from today.

Sent from my ONE A2005 using Tapatalk

[TWong1200]

Cleaning out garage. Anyone need these?

Lower trim under the headlights for a sedan. I believe they're Alpine White but I'm not positive.

Also L and R ZKW headlight mounting brackets.

Just pay shipping and they're yours.

http://images.tapatalk-cdn.com/15/11/24/f572c0167f94ecab81b5e0eeb65ed779.jpg


Sent from my iPhone using Tapatalk

[Snuffalufigus]

Right side fog light shipped :)


I've currently got fluted right now, so no problem for me. You sure you don't want a few bucks for it? At least for the shipping, maybe for a cold beverage too?

[az3579]

Free to a good home. Just cover shipping.

Random orbital:

http://images.tapatalk-cdn.com/15/11/26/2fc73a6875bb3695ba72dd3aa7215157.jpg

http://images.tapatalk-cdn.com/15/11/26/a461f2397f8d5ff81de3b19356863169.jpg

sent from my Droid Turbo

[hcbeck2689]

Would this be good for buffing after claying


-Holden

[az3579]

Would this be good for buffing after claying


-Holden

I don't see why not...
You can't use stick-on pads though, they have to be the kind that "wraps" onto it like in the picture.

[hcbeck2689]

I don't see why not...
You can't use stick-on pads though, they have to be the kind that "wraps" onto it like in the picture.

I'll take it if nobody wants it. I prob won't use it until it warms up. I have been putting off claying bc it scares me. I've done wet sanding and buffing on gel coats but never buffed paint.


-Holden

[az3579]

I'll take it if nobody wants it. I prob won't use it until it warms up. I have been putting off claying bc it scares me. I've done wet sanding and buffing on gel coats but never buffed paint.


-Holden

Wet sanding is FAR scarier than detailing... lol
PM me your shipping info.

[hcbeck2689]

I love this thread. I'm gonna have to see what I have laying around that I can pay forward.


-Holden

[Alikessu]

I would be interested in that buffer az3579
PM sent


Sent from my iPhone 6 using Tapatalk

[az3579]

I would be interested in that buffer az3579
PM sent


Sent from my iPhone 6 using Tapatalk
Holden claimed it. :)

sent from my Droid Turbo

[Alikessu]

no problem
good for him, I was a little late on that one[emoji106]🏻


Sent from my iPhone 6 using Tapatalk

[quikryptonite]

Right side fog light shipped :)

Got it yesterday. Looks like it's just what I need. Thanks again!

[Zaks]

Came across this thread while searching for a fog light replacement DIY. Why am I searching for a figlight replacement DIY you may ask? Well, because I just lost my passenger side foglight due to some ice/snow flying off of a truck and smashing into my front bumper! :(

[ELCID86]

Anyone with small hands? I'll send most of a box of small Nitrile gloves (I accidentally ordered...). $6.00 to cover s/h. PM me.

23329


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member

[fredo]

I have two (L and R) fluted fog lamps for ZHP. In good shape. Trim rings not included. Pay s/h and they are yours.

23639

[trancenation]

I have two (L and R) fluted fog lamps for ZHP. In good shape. Trim rings not included. Pay s/h and they are yours.

23639

I'll take them. What's your PayPal address? I'm located in CA.

[fredo]

PM sent. Fog lamps going your way this weekend.

[ELCID86]

Wow. Very generous. Great pickup.


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46fanatic

[trancenation]

PM sent. Fog lamps going your way this weekend.

Thanks again for the foglights man!

[fredo]

You're welcome. Glad to hear you installed them !

[johnrando]

I just switched out the final two pieces of my HK system to BSW, the rear tweeters. If anyone's rear tweeters are bad you can have these for cost of shipping, which I think would be a $5.50 USPS box. They work just fine. I have a vert, so I'm not sure if coupe ones are the same.

[jeffrop]

I just switched out the final two pieces of my HK system to BSW, the rear tweeters. If anyone's rear tweeters are bad you can have these for cost of shipping, which I think would be a $5.50 USPS box. They work just fine. I have a vert, so I'm not sure if coupe ones are the same.

I'll take them off your hands. I have a vert so they should work just fine. Let me know where to send paypal.

[johnrando]

PM sent

Sent from my SM-G900V using Tapatalk

[05Imola]

Might not be worth anything to anyone but I have the Cold Weather cover or "coat" for the CCV. I took mine off to make the install easier. Someone might want it if they are doing the CCV. Free to whoever wants it and I could meet up or deliver if shipping is covered.

[3ZHP]

Anyone need a OEM front plate bracket for a coupe or Vert?

http://uploads.tapatalk-cdn.com/20160511/d18824e9e414a9882695baa3bb5dc14f.jpg

http://uploads.tapatalk-cdn.com/20160511/2bcfcddfb90dcb5014d6509aa757ee76.jpg


Sent from my iPhone 6S using Tapatalk

[hcbeck2689]

Tomorrow I'm going to get exhaust off my car before I settle with insurance. There is a CAI, silver cube, other oem parts. If anyone in the RDU area wants the silver cube they can come swap for another trim. I don't want to leave it bare in case insurance tries to get money afterwards or something.
Silver cube is good except for shift surround is dirty( think it can be cleaned) radio piece is slightly bent, glove box piece is missing all tabs but one(but it sits flush. It's silver cube...
Someone could also come swap their front wheels for my rear wheels. Then you'd have a square 135 set. They need refinishing but not terribly bad. I think front were most scarred.

I'm sure their are more optimistic. I just think it could be taken advantage of considering I'm not buying it back now.


-Holden

[GotZHP]

Tomorrow I'm going to get exhaust off my car before I settle with insurance. There is a CAI, silver cube, other oem parts. If anyone in the RDU area wants the silver cube they can come swap for another trim. I don't want to leave it bare in case insurance tries to get money afterwards or something.
Silver cube is good except for shift surround is dirty( think it can be cleaned) radio piece is slightly bent, glove box piece is missing all tabs but one(but it sits flush. It's silver cube...
Someone could also come swap their front wheels for my rear wheels. Then you'd have a square 135 set. They need refinishing but not terribly bad. I think front were most scarred.

I'm sure their are more optimistic. I just think it could be taken advantage of considering I'm not buying it back now.


-Holden

I wish I was nearby to swap the 135. Id love to square up

[GotZHP]

Hi all,

I have a spare hydraulic tensioner pulley that I picked up from an e46f member. I have just replaced mine, so figured I'd pay it forward if anyone needs one.

Im in Socal, and will be in the 805 area on weekends, and Irvine during the week.

Let me know if anyone is interested.

[Johnmadd]

Tomorrow I'm going to get exhaust off my car before I settle with insurance. There is a CAI, silver cube, other oem parts. If anyone in the RDU area wants the silver cube they can come swap for another trim. I don't want to leave it bare in case insurance tries to get money afterwards or something.
Silver cube is good except for shift surround is dirty( think it can be cleaned) radio piece is slightly bent, glove box piece is missing all tabs but one(but it sits flush. It's silver cube...
Someone could also come swap their front wheels for my rear wheels. Then you'd have a square 135 set. They need refinishing but not terribly bad. I think front were most scarred.

I'm sure their are more optimistic. I just think it could be taken advantage of considering I'm not buying it back now.


-Holden

I'll take the cai.

[Dr Dynamite]

Hi all,

I have a spare hydraulic tensioner pulley that I picked up from an e46f member. I have just replaced mine, so figured I'd pay it forward if anyone needs one.

Im in Socal, and will be in the 805 area on weekends, and Irvine during the week.

Let me know if anyone is interested.
Sweet.... I'm in socal too..... may I take it off your hands[emoji2]

Sent from my SM-G925V using Tapatalk

[hcbeck2689]

I'll take the cai.

I ended up not having time to stop and get anything bc I was late for work. I hope I can go back and get the BMW perf exhaust

[Johnmadd]

I ended up not having time to stop and get anything bc I was late for work. I hope I can go back and get the BMW perf exhaust

That's cool, hope you can get your exhaust man.

[GotZHP]

Sweet.... I'm in socal too..... may I take it off your hands[emoji2]

Sent from my SM-G925V using Tapatalk

PM me and we can get in touch. Ill be out of town this weekend. Brother is graduating so ill be flying to Colorado. Back Monday Night.

Shoot me a PM and we can set up a meet:thumbup

[ELCID86]

Bluetooth music device (doesn't work for calls). Pay shipping and it's yours. I have one and use it every day--works well. This was for Colin's car...

http://uploads.tapatalk-cdn.com/20160520/4989688302a824e12f5f5a09e57b8b0d.jpg

[Alikessu]

I would be honored to take it

[Alikessu]

I can send you a PM with address
and how much for shipping?
priority $6.00

[ELCID86]

I can send you a PM with address
and how much for shipping?
priority $6.00

Sounds good. Will PM you PP info.

[Imola.ZHP]

Some free items in my part out thread http://www.zhpmafia.com/forums/showthread.php?18366-Part-Out-Thread-3-The-Leftovers&p=491988#post491988

[GotZHP]

Imola.ZHP

would you do a deal for the two pipes pictured together. The heater and inlet or what not :)

[Imola.ZHP]

Imola.ZHP

would you do a deal for the two pipes pictured together. The heater and inlet or what not :)

Absolutely, shoot me a PM with your zip code and I'll get them boxed tonight, see what shipping will cost and we can go from there. I'm working overnights this week so my sleep schedule is kind of crazy.


--Marcus

[thecos]

http://forum.e46fanatics.com/showthread.php?t=1105802
Some free stuff that may help someone out. NYC pickup

[hcbeck2689]

330i floor mats (grey) for MT
Buyer pays shipping
http://uploads.tapatalk-cdn.com/20160603/cbdc6c89a48280e47d502b9b1272e12b.jpghttp://uploads.tapatalk-cdn.com/20160603/ea1fdb1074ebe73509a0ddeac7b087c5.jpghttp://uploads.tapatalk-cdn.com/20160603/7d7fb5156165f390683a33c9b02f377a.jpghttp://uploads.tapatalk-cdn.com/20160603/48638db9b09a550c2dbb07023ed1c435.jpg


-Holden

[az3579]

Brand new, unused, E46 shock tower reinforcement plates. Pay shipping.

Only opened so I could put the other plate in there. One came with a bag and the other didn't. :dunno

http://uploads.tapatalk-cdn.com/20160604/94a1931c7256480626a6000ea6b0ffbe.jpg

Sent from my LG V10 on Tapatalk

[Simongym]

Yes please! Zip code 79906. PM shipping cost and paypal e-mail and I'll send the money.

The mats that came in my ZHP are mismatched and not in great shape.

[BADCLOWN]

Pay for shipping and you can have 2 brand new Turner rear strut tower plates. PM me if you want them.

[GotZHP]

Pay for shipping and you can have 2 brand new Turner rear strut tower plates. PM me if you want them.

Pmed

[BMWCurves]

I have an extra oil level sensor gasket (part no. 12611744292). Made by BMW. Free, just PM me.

[FL116]

I have an extra oil level sensor gasket (part no. 12611744292). Made by BMW. Free, just PM me.

Edit: Read it wrong, didn't see "gasket" lol disregard my PM

[BMWCurves]

Edit: Read it wrong, didn't see "gasket" lol disregard my PM

Gotcha. I already responded but yeah, pretty sure the old one is dead.

[trancenation]

Anyone have a pair of pre-facelift chrome sedan grills laying around?

[cakM3]

Anyone have a pair of pre-facelift chrome sedan grills laying around?

I might.... I have tons of "spare parts" laying around in my garage. I will check after I get home from work...

[Simongym]

330i floor mats (grey) for MT
Buyer pays shipping
http://uploads.tapatalk-cdn.com/20160603/cbdc6c89a48280e47d502b9b1272e12b.jpghttp://uploads.tapatalk-cdn.com/20160603/ea1fdb1074ebe73509a0ddeac7b087c5.jpghttp://uploads.tapatalk-cdn.com/20160603/7d7fb5156165f390683a33c9b02f377a.jpghttp://uploads.tapatalk-cdn.com/20160603/48638db9b09a550c2dbb07023ed1c435.jpg


-Holden

Do you still have these? My ZHP didn't come with floor mats.


Sent from my iPhone using Tapatalk

[ZHP_Brandon]

Does anyone have a passenger side Xenon rear cover for a facelifted sedan headlight?

I continuously find the single tab for M3 AL headlights everywhere, But I cant find one for a sedan and I keep getting a condensation build up after a car wash and with my headlights recently rebuilt I'm afraid it will cause some kind of wiring issue in the long run


Sent from my iPhone using Tapatalk

[Johnmadd]

Does anyone have a passenger side Xenon rear cover for a facelifted sedan headlight?

I continuously find the single tab for M3 AL headlights everywhere, But I cant find one for a sedan and I keep getting a condensation build up after a car wash and with my headlights recently rebuilt I'm afraid it will cause some kind of wiring issue in the long run


Sent from my iPhone using Tapatalk

Maybe you just need new lense gasket seals :dunno

[theothersawyer]

It sounds like he is missing the rear rubber cover so water is getting in from the backside....I think?

[Johnmadd]

It sounds like he is missing the rear rubber cover so water is getting in from the backside....I think?

Ahhh, your probably right.

[ZHP_Brandon]

Ahhh, your probably right.


It sounds like he is missing the rear rubber cover so water is getting in from the backside....I think?

Correct! I have new lense gaskets in it already after my rebuild

I need the back cover


Sent from my iPhone using Tapatalk

[Boca_RatonZHP]

Correct! I have new lense gaskets in it already after my rebuild

I need the back cover


Sent from my iPhone using Tapatalk


Show me a pic of what you need, I might be holding spare parts from my old headlights



Sent from my iPhone using Tapatalk

[ZHP_Brandon]

Show me a pic of what you need, I might be holding spare parts from my old headlights



Sent from my iPhone using Tapatalk

http://uploads.tapatalk-cdn.com/20160630/1de8e000ec52534ec3f3e194128530e2.jpg

Black cover to the right, I need the passenger side but if you have both I guess I'll take both since there rare all together some how.



Sent from my iPhone using Tapatalk

[C00KIE M0NSTER]

E-brake handle
-Just pay shipping

http://i444.photobucket.com/albums/qq164/1MZ-FZE/Mobile%20Uploads/8CC0F72B-D2A4-42AA-851D-4FE95AE09460_zpsfntnbffv.jpg
http://i444.photobucket.com/albums/qq164/1MZ-FZE/Mobile%20Uploads/BAD3844A-D5DC-4E78-BD2C-9F7A186C1AB6_zps3kflccg3.jpg

[Boca_RatonZHP]

http://uploads.tapatalk-cdn.com/20160630/1de8e000ec52534ec3f3e194128530e2.jpg

Black cover to the right, I need the passenger side but if you have both I guess I'll take both since there rare all together some how.



Sent from my iPhone using Tapatalk


Yeah I don't have that part. My mistake, I have the parts for a coupe/vert.


Sent from my iPhone using Tapatalk

[poke08]

http://uploads.tapatalk-cdn.com/20160806/be86b757a39d7db90224b33f239568fb.jpghttp://uploads.tapatalk-cdn.com/20160806/87cf0b1bbbaa0244167af93ebfe02755.jpg

Found these laying around and have no use for them since I don't have BC coilovers anymore. Just pay shipping.


Sent from my iPhone using Tapatalk

[rguti153]

http://uploads.tapatalk-cdn.com/20160806/be86b757a39d7db90224b33f239568fb.jpghttp://uploads.tapatalk-cdn.com/20160806/87cf0b1bbbaa0244167af93ebfe02755.jpg

Found these laying around and have no use for them since I don't have BC coilovers anymore. Just pay shipping.


Sent from my iPhone using Tapatalk
Good deal shiiit i have a set already

Sent from my SM-G935V using Tapatalk

[cakM3]

http://uploads.tapatalk-cdn.com/20160806/be86b757a39d7db90224b33f239568fb.jpghttp://uploads.tapatalk-cdn.com/20160806/87cf0b1bbbaa0244167af93ebfe02755.jpg

Found these laying around and have no use for them since I don't have BC coilovers anymore. Just pay shipping.

If you still have these I want them :thumbsup

Send me a PM for details, thanks! :)

[WOLFN8TR]

Crap how did I miss these!!!! Damit...

[cakM3]

Found these laying around and have no use for them since I don't have BC coilovers anymore. Just pay shipping.

Thanks Jon! :thumbsup

[WOLFN8TR]

I have a GPX KCCD6316DT under the cabinet radio I don't really use, it came with the house. I'm installing some LED under the cabinet lighting and it's in the way so I removed it. I use to play my iPhone thru it via the Aux input. I has the Radio and CD as well. I never tried the CD so I do not know if it works or not. It also has the remote control. Pay for Shipping and it's yours!

Features:
Slim drawer-load programmable CD/CDR/CDRW player
Mounts under cabinet to save counter space
Dual front-firing speakers
Instant weatherband with fine tuning control
Digital tune AM/FM stereo radio with station presets, FM wire antenna
Dual blue backlit LCD displays: Player function / timer / sleep digital display; Digitally-created analog clock display
Adjustable kitchen timer sounds to alarm, CD or radio
Full function remote contol, remote battery included
Auxilliary audio L&R input jacks
DC input jack (adaptor not included)
AC powered, AC line cord built-in
Battery back-up remembers the time during power outage
Uses 2-"AAA" size batteries for back-up (not included)
Under-counter mounting screws and spacers included.




http://uploads.tapatalk-cdn.com/20160816/1ac7cf75f3f31297d4a0162f6057f552.jpg

http://uploads.tapatalk-cdn.com/20160816/9288d804fb4efb36f662ea74701307f0.jpg

http://uploads.tapatalk-cdn.com/20160816/176ebd3a742c53bc4ff171aff2642a0c.jpg

[johnrando]

Cool. I can ask wifey if she wants it.

Sent from my SM-G935V using Tapatalk

[WOLFN8TR]

Sounds Good...

[FL116]

Does anyone have any ///M Logo wheel emblems laying around? PN: 36112228660

[NoVAphotog]

Does anyone have any ///M Logo wheel emblems laying around? PN: 36112228660

I think I have one...would have to look around at dad's...I know they aren't cheap...

[FL116]

I think I have one...would have to look around at dad's...I know they aren't cheap...
Yeah, anything would be great. Them suckers aren't cheap lol

Sent from my SM-G930V using Tapatalk

[WOLFN8TR]

I have some I bought of eBay. I ordered the wrong ones so I have 4 of these. If you want one let me know.


http://uploads.tapatalk-cdn.com/20160826/0a5b28985a09ad8207c20589c3fd5eb5.jpg

http://uploads.tapatalk-cdn.com/20160826/62e14a3b91e3dbca825df4b49a86a34b.jpg