Sweet!
Love p-tech, been going there for a few years. They have expanded so much.
Matt wants me to s54 my car, haha.
Printable View
Sweet!
Love p-tech, been going there for a few years. They have expanded so much.
Matt wants me to s54 my car, haha.
Wing would support you too! He thinks the sedan s54 is overplayed and wants to see a local wagon. Do it!Quote:
Originally Posted by Johal E32
I can't wait for their new facility!
sent from Moto X Dev Edition
Haha Derek, I have different plans..
Cough Ls2
New wheels...17x8.5 et35. Do they make them??
Sent from my GS3.
Dissapointed. HahahQuote:
Originally Posted by Johal E32
sent from Moto X Dev Edition
I'm not sure. I can check. That doesn't guarantee the spokes will clear though.Quote:
Originally Posted by Hornung418
sent from Moto X Dev Edition
edit:
They do however have a 18x8.5 +35
http://www.apexraceparts.com/apex-pr...C-7-Wheel.html
http://www.apexraceparts.com/EC7-18-PROF1-RS.jpg
LOL.
Awesome update, love the black calipers. That shop is extremely badass as well, I need to move West!
Thanks Steve!
I chose black calipers because it was subtle and easier to clean. The car has a lot of mods that are behind the scenes so it definitely looks the part with the rest of the car.
I'm planning to do a few changes in the coming weeks.
- Get rid of AFE Intake
- Buy spacers for rear
- find a upholstery shop to close the hole for now.
Back to the stock box?
Yup. I can't figure out what is going with the AFE intake. Lean codes usually means there is a leak after the MAF. I already replaced my upper and lower boots and F connector. With a stock intake, I do not get these error codes so I am a little lost on what the problem is. I thought it might have been the MAF sensor O-ring that is removed from the stock intake but that is pre-MAF not post MAF.Quote:
Originally Posted by Vas
$300 can go to my driver side bolster.