Post your daily ZHP/BMW/MINI pics!

I pop mine in and out to adjust my fogs a lot. There are clips on the top, bottom and outside of the trim piece. Just press the bumper slightly away from the trim piece at those three points one at a time and pull the trim piece out.

I can take pics later if this doesn't make sense. But if you want to take the bumper off it only takes a minute or two to do.


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by HokieZHP

No you don't. They just pop out


Sent from my iPhone using Tapatalk

---

Quote:

---

Originally Posted by danewilson77

I though the fog surrounds were secured with one bolt, and one installed clip?

---

Everyone is forgetting one thing: these are aftermarket surrounds. These need the bumper to be taken off to remove them; trust me, I've tried.
The stock ones are super easy to remove. These, are not.

Another win for OEM parts...

Horney...via TT.

Quote:

---

Originally Posted by az3579

Everyone is forgetting one thing: these are aftermarket surrounds. These need the bumper to be taken off to remove them; trust me, I've tried.
The stock ones are super easy to remove. These, are not.

---

Oh I didn't know, alright. I was going to say, I didn't think they were that difficult to remove haha.

But in that case the bumper can be removed in a couple minutes so it should still be relatively easy to do


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by HokieZHP

But in that case the bumper can be removed in a couple minutes so it should still be relatively easy to do

---

You definitely weren't paying attention then at the reunion. lol
It took a few of us at least 20 minutes to remove the darned thing, and that's with the help of fellow mafiosos... it would take me even longer for sure. :(

No I saw you guys doing that but I got mine off in a couple minutes. I haven't done it for a few months but I think it's just removing fender well screws, removing skid plate, and removing the two bolts and disconnecting the fog lights and pull out. Maybe I'm wrong though. It's been a while since I did it


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by HokieZHP

No I saw you guys doing that but I got mine off in a couple minutes. I haven't done it for a few months but I think it's just removing fender well screws, removing skid plate, and removing the two bolts and disconnecting the fog lights and pull out. Maybe I'm wrong though. It's been a while since I did it


Sent from my iPhone using Tapatalk

---

Yeah almost everything on the bumper is easy to remove. EXCEPT the god damn plastic rivets right underneath the plastic mesh insert in the center of the bumper. I dropped so many F bombs trying to get those out. You have like .2 inches to move your hand and no way to fit any practical tool in there to remove them. Everything else came off easy.

spotted someone in my rear view... :)
http://i9.photobucket.com/albums/a67...0/7fa5ed46.jpg

Quote:

---

Originally Posted by Newjack

Yeah almost everything on the bumper is easy to remove. EXCEPT the god damn plastic rivets right underneath the plastic mesh insert in the center of the bumper. I dropped so many F bombs trying to get those out. You have like .2 inches to move your hand and no way to fit any practical tool in there to remove them. Everything else came off easy.

---

That's the killer. Not breaking shtuff when removing.

Quote:

---

Originally Posted by S85FTW

spotted someone in my rear view... :)
http://i9.photobucket.com/albums/a67...0/7fa5ed46.jpg

---

A ZHP in anyone's rear view is a good sight :thumbsup

Great pic Kris! ;)