Nice
Printable View
Nice
Awesome
Sent from my SM-G900V using Tapatalk
Thanks guys!
Where did you buy the boom mat? I might pick some up.
I bought mine from ECS tuning, but i believe it could be found on amazon too. For probably cheaper too. Heres a link to the one I bought.
https://www.ecstuning.com/BMW-E46-33...3.0L/ES263614/
You might not even need that much since you have a coupe, I used about 2 mats per door, and they were decently covered. Be careful handling the edges of that stuff! they are extremely sharp.
Perfect, thanks! Sounds like four sheets will do it.
Today, I received my rebuilt front calipers from Turner Motorsports, Stoptech stainless steel brake lines, and some Pentosin super dot 4.
Ive been having a squeaky brake caliper on both fronts for almost a year now and it drives me crazy. Constant squeak while driving, then the second I hit the brakes it goes away. I was originally thinking it was the rotors, but after inspecting the piston in the caliper on the drivers side i saw some decent amounts of rust.
At only 65 bucks per side, (including a core charge I think) I decided to buy both left and right sides. Man these things look good! I am highly impressed with the quality of the rebuilds. The came with all the necessary hardware/bushings as well! Next, I plan on doing some slotted rotors and new brake pads. I'd love to hear your guys recommendations on both those! :thumbs
Hopefully will be able to install these bad boys this weekend if it doesn't rain.
http://uploads.tapatalk-cdn.com/2016...4eca7fab88.jpg
Cool
Sent from my SM-G900V using Tapatalk
Decided to go ahead and buy new front rotors and pads before I install the calipers. Pretty soon I will have nearly brand new brakes in the front! Next thing is a rear brake refresh!
I decided to go with stoptech slotted rotors and hawk HPS pads.
http://uploads.tapatalk-cdn.com/2016...d02276de28.jpg
Also got some stainless steel rotor set screws from ECS!
http://uploads.tapatalk-cdn.com/2016...e2a34989c2.jpg