I'll check it out on Friday :-)
Sent from my GS3.
Printable View
I'll check it out on Friday :-)
Sent from my GS3.
We can try hot glue when you come too if you'd like.
One other thing I did was file down the post do it doesn't grab so tight. I had a couple post rip the plastic inserts right out of the dash
You got lucky with hot glue. This is what I used on my original trim piece and broke right off again.Quote:
Originally Posted by Sockethead
You didn't use enough... Lol
Epoxy round two. The radio piece can be bent to make it flush...if thats bothering you on your car. Pull it and fit it by hand. Sits flush and will be okay if my epoxy holds up.
Fixed the ipod connectivity. Had my 10 pin reversed connection. Simple.
Sent from my GS3.
Parked on the side of the road...hazards on. Three days out from the meet. Great sign.
Mom is bringing my laptop to my stranded location and I will find out what the problem is now. I'm guessing it's another dropped coil. Cylinder 2 was replaced less than 3 months ago. If it is, guess who is buying a whole set of new coils...
Sent from my GS3.
Plastic weld is holding up though! Just installed it before tried to leave for work.
http://img.tapatalk.com/d/14/04/29/hysupudu.jpg
Sent from my GS3.
Coded the DME to 7651522. Problem solved for the time being...
Sent from my GS3.
Oooh problem with the software?
"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
Guess so. Worked fine for a week...then it gave up on me. I had been messing with the radio the night before, but I didn't notice anything wrong last night at 10pm when I returned home from school. Really strange. I cleared the adaptation values in an attempt to get rid of the issue. Still stumbling at 2k rpm not sure what that is...
Sent from my GS3.
Coil? One failed coil shouldn't leave you stranded. Or are you saying it's something to do with the DME?Quote:
Originally Posted by Hornung418
My car dropped a coil and the thing just ran on 5 cylinders like a champ. I barely noticed an acceleration difference, other than it running like a diesel. lol
It exhibited symptoms of a failed coil(s). Hunting and the horrible shaking. Just hazarded a guess until I got my computer from Mom. It was also 6 am.Quote:
Originally Posted by az3579
Sent from my GS3.
Installed the passenger side AL headlight this morning. Nose step closer to lighting perfection. This weekend will be a coding marathon at the reunion.
Ordering OEM clears as soon as I get the overflow cash.
Sent from my GS3.
You want ZKW lens for those?
Already installed them. The output is brilliant. Cant wait to get them leveled and coded for the trifecta.
Sent from my GS3.
I was considering the lenses but I don't want to deal with the spacing problem. Any input?
"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
Spacing problem?Quote:
Originally Posted by Avetiso
Sent from my GS3.
Don't the ZKW lenses sit a little closer to the bulb because they are larger than the AL?Quote:
Originally Posted by Hornung418
"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
No. It's an exact fit.Quote:
Originally Posted by Avetiso
Sent from my GS3.
Oh okay. I should do that then.Quote:
Originally Posted by Hornung418
"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
I'd be interested in them.Quote:
Originally Posted by Sockethead
"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
Yeah the replicas are the ones with fitment issues. OE ZKWs are good.
Sent from my GS3.
Are you going to be at the meet?Quote:
Originally Posted by Avetiso
Haha all the way from California!
Sent from my GS3.
Alrighty then I guess that's a no... PM me if yer interested
No, lol. It'd have to be shipping if I bought them from you.Quote:
Originally Posted by Sockethead
"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
Ok I'm going to post in the for sale section but you have 1st dibs. Let me know by PM. Don't want to jack this thread
Okay, sent you a message.Quote:
Originally Posted by Sockethead
"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
Haha...there is nothing to jack in this thread :)Quote:
Originally Posted by Sockethead
Sent from my GS3.
The DIY I used talked about using spacers, but I was able to adjust the housings "out" far enough that I didn't need them. Don't be skeered, you'll love the outcome!Quote:
Originally Posted by Avetiso
Spacers are used to change the cutoff colors. I would love a set of ZKW lenses to swap into my ALs..
I just used the adjustment screw to get a clear blue cutoff.
Sent from my GS3.
Exactly.Quote:
Originally Posted by Hornung418
Just bought two pre-cat oxygen sensors, fuel pump and filter.
$374.99 via the Amazon Affiliate Link. Using Prime shipping I will receive them tomorrow.
You mean you didn't have enough fun with that yesterday (filter & fuel pump)?!Quote:
Originally Posted by Hornung418
Ready for more lol.
Getting an alignment right now. $75 at Mister Tire. It's where the local shop sent me to...so I hope this works out.
Sent from my GS3.
At least you know what your in for with the fuel filter.
Yeah...hoping it's just Newjack's car being a huge bitch.
The filter on the 328 was much easier to change.
Sent from my GS3.
Sounds like a plan. Hope that the alignment goes well and that the fuel filter isn't a PITA to swap when the time comes.
Driving home was enjoyable. I didn't have to fight with the car to go in a straight path!
http://img.tapatalk.com/d/14/05/06/je8y7e7a.jpg
Sent from my GS3.