What did you do for your ZHP/ BMW / MINI today? #2

I finally replaced my CCV system, intake boots, and rebuilt my DISA with a GAS unit. Not too bad of a job. About three hours. I've had the parts for months now!

https://uploads.tapatalk-cdn.com/201...d9a3a0904f.jpg

Sent from my Nexus 6P using Tapatalk

Nice.

Good job on the CCV. I hear it can be a bear. GAS DISA is actually kind of fun to do.


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member

Quote:

---

Originally Posted by ELCID86

Finally got the ZHP off the jackstands. MFactory LSD is in, rear shocks loosened up a bit, loose front endlink tightened. Rainy and 52* here in VA. Took the car out for a quick check ride. It feels great! The 3.38 is exactly what I was looking for. Rolling start in 2nd!, nice pulling power in 3rd and 4th! Can't wait to get it broken in and really put it thru its paces.


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member

---

Nicely done, I look forward to seeing what you think when you've gotten some miles on the setup!

Quote:

---

Originally Posted by Johnmadd

I got some new foglights for Christmas. ..

They are totally black when off and project nicely when on, ddm hid kit is on the way.

---

Very cool. Did you just change out the lenses/cover the lenses or are they new headlight assemblies?

Quote:

---

Originally Posted by Ssparrow

Got my wheel spacers and new air filter for my stage 2 afe. Original plan was just to put the filter on since it was 25 degrees outside . I got a wild hunch and decided to put on the spacers as well. I need to adjust the camber in the front a tad and either shave off, or remove the bumper clip on the rear. Other than that she sits nearly exactly how I want it to sit!

Hopefully it'll be warm enough to give her a good bath tomorrow! I'll be sure to get some shots on the dslr if I do.

---

Those wheels look great where they sit! I also have always loved the way that Yakima rack looks. I'd love to have it on mine, but it would serve absolutely no purpose, haha

Quote:

---

Originally Posted by BimmerDude

Attachment 23253

---

Which head unit is that, Eonon? How do you like it?

Quote:

---

Originally Posted by TWong1200

I finally replaced my CCV system, intake boots, and rebuilt my DISA with a GAS unit. Not too bad of a job. About three hours. I've had the parts for months now!

---

Nicely done. What prompted you to swap out your CCV system?

As for me, not today but over the last few days:

• Installed ///M license plate cover in the front.
• Swapped my cloth mats for BMW all weather mats
• Installed my ProClip cell phone mount to my Bimmian mount (currently dismantled while the black spray paint for the mounting screws/nuts dries)
• Swapped my alcantara shift boot and parking brake boot for leather ones.

Put all of the tools away from the diff and suspension work. I think I had just about every tool I own out!

Also changed the oil on Nolan's TDI.


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member

They are new assemblies.

Engine in the red 2002 and trans almost bolted up.

http://images.tapatalk-cdn.com/15/12...f04d1e7b92.jpg
http://images.tapatalk-cdn.com/15/12...6cc49a6ece.jpg
http://images.tapatalk-cdn.com/15/12...ba62c6a202.jpg
http://images.tapatalk-cdn.com/15/12...da508506b4.jpg
http://images.tapatalk-cdn.com/15/12...c3cefd7e3e.jpg
http://images.tapatalk-cdn.com/15/12...d1c1f2d1f8.jpg
http://images.tapatalk-cdn.com/15/12...6793551dcf.jpg
http://images.tapatalk-cdn.com/15/12...c674146a50.jpg
http://images.tapatalk-cdn.com/15/12...1582258c38.jpg

That's awesome Stuart! :drool

Tight, tight, tight! ~Tuco

Sent from my SM-G925V using Tapatalk

Awesome!