Probably. I don't think I notice less tailgating in my Pilot... Just no photos
GoingHAM mobile
Printable View
Probably. I don't think I notice less tailgating in my Pilot... Just no photos
GoingHAM mobile
For those of you who tinted your cars, what tint do you have and how do you like it? I had SunTek Carbon on my last car for 18 months and had no problems but I'm just trying to see if I should venture to another brand/line with my ZHP.
There's a place in town that does work for local Audi and BMW dealerships and they use either SunTek Carbon for $200 or SunTek CXP (SunTek's top of the line I think) for $250, which seems reasonable. They deal with the dot matrix by adding vinyl 2-3 weeks after the initial tint has cured.
Thoughts?
Brands are brands, just make sure you get ceramic
GoingHAM mobile
Deos anyone have any tips for getting these chips and small dent fixed?
http://i.imgur.com/TwyzWvx.jpg?2
Is there a good kit or DIY that would fix this? Would it be expensive to get it fixed by a pro? Its not that large but the small dent is pretty annoying and the chips dont help it.
I would ask a PDR shop about the dent, it should be cheap because it's small. I hear Dr ColorChip can fix the chips, you get the kit and DIY.
+1 on PDR
PDR + Dr. Colorchip
"No flamesuit required"
PDR might even have touchup for it if they specialize in BMWs. I know my guys uses to do that. Dent Wizard.
Looking to buy FCABs, and will most likely get Lemforder as they appear to be the OE supplier and I would like to stick with the OE ride. I believe I read somewhere on here that the Meyles are of poor quality currently...
So, when I plug in part number 31126783376 to a BMW parts search engine I gets lots of results, with RockAuto being most cost effective by a decent margin for the Lemforder brand (~$65 with a discount). They appear to be ~$91 at ECS. I have never ordered from RockAuto, and when you click on the part number (1797801) it doesn't show that they fit our cars per RockAuto. However, it is directly linked to the BMW part number above.
Could someone advise whether these are indeed the correct FCABs or not? I tried to look at the Lemforder catalog, and 1797801 appears to be correct, but thought I would check here to make sure. Thanks.
Another good option is factory Z4M control arm bushings.Quote:
Originally Posted by ClimRox