Wobz

Quote:

---

Originally Posted by az3579

This wasn't done the OEM way, so I don't have the correct LCM pins hooked up. I didn't do it that way because I wanted them on as running lights, and the OEM way requires the light switch to be on.

If you follow any angel eye harness DIY, you can hook up city lights to the AE harness. Just hook in the city lights instead of the AE's.

I bought my harness from Khoalty for $12.

---

Sweet, thanks for the insight! I agree, I'd prefer city lights to operate the way you've set them up.

Car looks great, by the way. I envy your style 71's and performance brake kit. I keep thinking about picking up that kit from ECS...

Quote:

---

Originally Posted by spencers

Car looks great, by the way. I envy your style 71's and performance brake kit. I keep thinking about picking up that kit from ECS...

---

Won't be thurr forever. :biggrin

did you need to run spacers for those 17s? looks good man! :)

Quote:

---

Originally Posted by derbo

did you need to run spacers for those 17s? looks good man! :)

---

What 17's? The wheels that are the same size and offsets as stock ZHP wheels. No spacers. Less than maybe 3mm of clearance between caliper and spoke. :)

My Kosei K1 auto-x wheels are 17's. I'll have to see if I could fit them because I completely forgot about them when I ordered the kit.


Sent from my iPhone 4S from Tapatalk

My ZHP rims do not fit due to the spoke design. I had to run a 5mm spacer minimum to clear the spokes..But thats not bad.

Quote:

---

Originally Posted by derbo

My ZHP rims do not fit due to the spoke design. I had to run a 5mm spacer minimum to clear the spokes..But thats not bad.

---

Not bad at all. Because of the spoke design, thinking that Kosei K1's should clear. They're track wheels, so I would hope the design accounts for that! They cleared my BBK on my E30 (4-piston), only those were 15".


Sent from my iPhone 4S from Tapatalk

well plus the ZHP rims are 18x8 +47... super high offset. LOL. My RPF1 18x8.5 +40 fit perfectly.

Quote:

---

Originally Posted by derbo

well plus the ZHP rims are 18x8 +47... super high offset. LOL. My RPF1 18x8.5 +40 fit perfectly.

---

Thats for the fronts. Rear are 8.5 ET?? 37? 40?

HTC Thunderbolt+TT

Quote:

---

Originally Posted by danewilson77

Thats for the fronts. Rear are 8.5 ET?? 37? 40?

HTC Thunderbolt+TT

---

Factory ZHP sizes with Style 135's are:
Front: 18x8 et47 with 225/40 tires
Rear: 18x8.5 et50 with 255/35 tires


Sent from my iPhone 4S from Tapatalk

good question I never tried the rear rims on the front to clear the 135i brakes. I will do that soon when I switch over to see if they clear. Otherwise I would love to have some 17s like you haha