What did you do for your ZHP/ BMW / MINI today? #2

should be able to do it from inside the cabin - no need to remove the exhaust.

Quote:

---

Originally Posted by Dual

I have been reading and found threads where it's a simple swap and threads where you have to remove the exhaust system.
Our cars?...

---

If you wanna do it properly, you have to remove the whole exhaust system. I have seen some where you hack/pick the shifter out. Your car, your call.

I have the rod I just have yet to install it on mine. This is making me want to do it even more now.

I did it from inside the car. No need to remove the exhaust.

Quote:

---

Originally Posted by BADCLOWN

Yes, that is it. I have it in my car as well paired with a UUC DSSR. Haven't gotten my car back yet from the spring install but I'm excited to see how much of an improvement it is.

---

The DSSR is da best

I did the UCC SSK and DSSR without removing the exhaust but it was a PITA. UUC SSK requires you to remove the shifter carrier and modify it. That's what makes it so difficult... plus one of the carrier pins was frozen... But out of all my mods, it's my favorite:)

Installed Bimmian cell phone mounts in both my zhp and X3 today. They look really nice and are built really well but I wish that the fit was a little better.
For the zhp I had to do a little bending of the mount bracket to get a really good fit and have it not interfere with the dash trim. On the X3 I had to do the same but the trim around the radio is still a little off because the bracket is pushing it forward.

zhp
Attachment 26042

X3
Attachment 26043

I need to finesse mine a bit so it doesn't make the dash trim poke out. I just added this magnet to it instead of the clamp.

http://uploads.tapatalk-cdn.com/2016...bdda927c63.jpg


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - anonymous

Quote:

---

Originally Posted by daytona90t

Installed Bimmian cell phone mounts in both my zhp and X3 today. They look really nice and are built really well but I wish that the fit was a little better.

---

Consider yourself lucky you even got it to look so good! I effed around with mine for about half an hour trying to get it to sit flush and the radio trim still pokes out a bit. Yours actually looks perfect, as though the bracket wasn't even there...

Quote:

---

Originally Posted by ELCID86

I need to finesse mine a bit so it doesn't make the dash trim poke out. I just added this magnet to it instead of the clamp.

http://uploads.tapatalk-cdn.com/2016...bdda927c63.jpg


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - anonymous

---

Fantastic idea. Need to move mine on to it.


Sent from my iPhone 6S using Tapatalk