Installed a CG Lock device today.
Printable View
Installed a CG Lock device today.
Sorry, I missed this post... I have 141K on it so far. Everything is still in excellent shape. My motor mounts are still perfect and the lower control arms are also in excellent shape. Very surprised about these two... Tie rods are also fine.
It's pretty strait forward. When you unbolt the pan, there are two bolts hidden up inside the bell housing and there are a couple more in the back that are kinda hidden or they seem like they wouldn't hold the oil pan on but they do...
It looked pretty bad but I think it's been leaking for some time. Sometimes a VCG or OFHG will leak down the side of the block and look like and oil pan leak but I already did those two a while ago.
http://uploads.tapatalk-cdn.com/2016...c5f29fb206.jpg
Lots of good stuff goin' on in here. Nothing on my car lately, but I've gots good stuff to do. :)
This past Saturday -
installed new windshield wiper
Changed engine oil and filter
Replaced the broken passenger side headlight level sensor lever
Also adjusted the tires pressures
Front - 32 psi
Rear - 37 psi
Sent from my iPhone using Tapatalk