MINI today? #2

Printable View

08-17-2016, 10:32 AM
slater

Quote:

Originally Posted by BimmerDude

Im running a 18x9.5 et35 with a 245/35/18. Ive dialed in a bit of camber in the rear and fenders are rolled slightly (no rubbing)

OK. i have been thinking about converting my set of ARC-8s into a staggered setup, but that seems too aggressive for me. i will probably go with the 18x9 ET42, which i will probably rub with. running 18x8.5 ET38 square now.
08-17-2016, 12:01 PM
BimmerDude

Quote:

Originally Posted by slater

OK. i have been thinking about converting my set of ARC-8s into a staggered setup, but that seems too aggressive for me. i will probably go with the 18x9 ET42, which i will probably rub with. running 18x8.5 ET38 square now.

hmm. Ive been toying with the idea of having 3mm milled off the 18x9.5 to make it et38. That way I could run a proper 255 in the rear.
08-17-2016, 02:03 PM
ELCID86

Got my new M cluster back to the right mileage. http://uploads.tapatalk-cdn.com/2016...fb06410d1e.jpg
08-17-2016, 02:20 PM
Sockethead

Awesome Shawn, easy fix with PA soft?
08-17-2016, 04:50 PM
BMWCurves

Nice
08-17-2016, 05:38 PM
danewilson77

Both F connectors I recieved were broken due to "improper packaging" (aka rattling around in box. It's a neat looking product but I'm not convinced of its longevity. The third on I recieved (in perfect condition) has been sitting on my desk for many months.

http://uploads.tapatalk-cdn.com/2016...7e19c118be.jpg

http://uploads.tapatalk-cdn.com/2016...89da140fc1.jpg

http://uploads.tapatalk-cdn.com/2016...6bc89ed4d1.jpg

[IMG]http://uploads.tapatalk-cdn.com/20160818/08e931bcd7d6fafb8e1fbed98ab66556.jpg[/IMG

The smaller line is the weak link.

http://uploads.tapatalk-cdn.com/2016...b4aa385b69.jpg

S7 Edge, out
08-17-2016, 06:18 PM
slater

Quote:

Originally Posted by BimmerDude

hmm. Ive been toying with the idea of having 3mm milled off the 18x9.5 to make it et38. That way I could run a proper 255 in the rear.

would 255's really fit at that point? how much negative camber are you running? and how much have you rolled the rear fenders? (a pic would be great)

i'm concerned about rolling too much as i don't want to introduce corrosion issues. my paint guy refused to roll them for me when i had the car repainted.

Quote:

Originally Posted by ELCID86

Got my new M cluster back to the right mileage.

nice!! what was the resolution?

Quote:

Originally Posted by danewilson77

Both F connectors I recieved were broken due to "improper packaging" (aka rattling around in box. It's a neat looking product but I'm not convinced of its longevity. The third on I recieved (in perfect condition) has been sitting on my desk for many months.

The smaller line is the weak link.

dang... that sucks. the stock plastic one lasts ~10 years or longer... might as well go that route. :)
08-17-2016, 08:08 PM
Prestovie

5 Attachment(s)

Just got my steering wheel back from Coby Wheels, while I was waiting for it in the mail I was having to put up with my MOMO wheel which for some reason clicked every inch that I turned the wheel, so you can say I'm more than happy to have my baby back:)
The stitching is unbelievable and the alcantara is so supple, would highly recommend!Attachment 26778 Attachment 26779 Attachment 26780 Attachment 26781 Attachment 26782
08-18-2016, 03:28 AM
330i Lover

How long did it take to install? Did you have to swap out springs or cables from you're momo?

Sent from my SAMSUNG-SM-G900A using Tapatalk
08-18-2016, 04:23 AM
BimmerDude

Quote:

Originally Posted by ELCID86

Got my new M cluster back to the right mileage. http://uploads.tapatalk-cdn.com/2016...fb06410d1e.jpg

ok.. I need this.. where are you guys sending these Clusters??:shifty