I used a flat head screw driver to help apply some leverage to pop them off.
Printable View
I used a flat head screw driver to help apply some leverage to pop them off.
This.
https://i.imgur.com/8y9FOxC.jpg
Parts used:
1) 3/8" tubing
2) 10mm metric screw (length does not matter)
3) Clamp (forget the size)
All parts were obtained from Home depot. Hopefully this will take care of the ever recurring headlamp washer leak for good.
My service positioned wiper arms are laughing at the poor gear puller. I'm at a loss. https://uploads.tapatalk-cdn.com/201...d23662042b.jpg
PB blaster?
Keep that cowl conditioned famYeah I read a lot about people being able to wiggle them off and sometimes pry them but definitely get them off with a gear puller. God hath forsaken me. They soakin rn
Yup. Two of my go to products for trim
https://uploads.tapatalk-cdn.com/201...768a8adece.jpg
Sent from my Pixel 2 XL using Tapatalk