What did you do for your ZHP/ BMW / MINI today? #2

Hey Zell nice work. Lets talk sometime soon! I have been messing with everything and the seats don't reposition themselves when it unlocks on my car too. Good news is tpms is working for me. I'm still trying to get ncs to work for e70 or e90 cars.

Quote:

---

Originally Posted by Zell

Coded it! Got some really nice features now in my car.

- HI/LO instead of "59" and "91" degrees on the climate control
- Activated clown nose blinking on lock
- Remote window closing
- Disabled remote window opening
- Disabled key-in window closing/opening (no more worrying about rainstorm scenarios)
- Changed my oil/service interval to 7,000 miles instead of 15,000 (no more mental math)
- Enabled single flash of turn signals on lock, two-flash on unlock
- Automatic door lock at I think 16 km/h
- Seats move into my position on the unlock button (supposedly, I couldn't get it to work right)
- All door locks open with remote instead of selective

I used NCSExpert and NCSDummy to do it.

Tomorrow will be updating the ECU to v41 and resetting adaptation values

---

Nice work. Isn't the BOLDed supposed to work with the Seat Memory function?

Quote:

---

Originally Posted by alexandre

Received OEM clearz all around from the UK today. They need a buff, but the seller cut me a great deal. Installation tomorrow PM. :thumbsup

---

How do you clean the inside of the lens? I just got mine and the inner lights has a lot of dirt.

Quote:

---

Originally Posted by johnrando

Nice work. Isn't the BOLDed supposed to work with the Seat Memory function?

---

I think so. I saw it work a couple of times but it was sporadic. Maybe I just don't exactly know how it works yet.

What I did notice is that disabling comfort open/close from the key did not change it. It still opens/closes even though I disabled it. I've tried re-enabling it and disabling it, but it doesn't seem to do anything. I'll have to delve into this further. Kind of odd...

Quote:

---

Originally Posted by Zell

I think so. I saw it work a couple of times but it was sporadic. Maybe I just don't exactly know how it works yet.

---

It seems to have a mind of it's own on my car as well.

Sometimes it sets it to setting 2 which is wifes.

Sometimes it correctly sets it to 1 mine

Sometimes it sets the seats to my setting but leaves the mirrors at hers.

In all situations the seat memory buttons put everything to the correct positions.

:dunno

Quote:

---

Originally Posted by Tnhl1989

Hey Zell nice work. Lets talk sometime soon! I have been messing with everything and the seats don't reposition themselves when it unlocks on my car too. Good news is tpms is working for me. I'm still trying to get ncs to work for e70 or e90 cars.

---

Where are you at with the E70? I supposedly have the right cable but I can't get it to talk to our E70 either.

wow, the PO of my car must have had some coding done. i didn't realize that a number of features on the car are not standard, such as:

- clown nose blink on lock (without alarm)
- doors lock above 10mph
- turn signal flash on lock/unlock


sweet, i'll take it!

I have the blue cable and a grey cable. Ill update it later with which ones. I think I have to update Edibas to version 7 something. Not really sure how to do that now. Going to test everything later. Anyone got an updated inpa/ncs/Edibas working?

These are the two I have :
Attachment 8123

The blue one works with the E46. The clear / silver one has a different circuit board in it and is supposed to be able to talk to the E70 but I can't get it to work.

Same two I got. I'm been reading around and I think it varies on the software as well. I'm making some vms with updated software to test out before redoing my programming laptop.