Printable View
Posted in my project thread but I'll drop this here too:
ARC-8s installed. Somehow Apex shipped me a set of 9.5s to go with the 9s. Tried the 9.5s first (love the concave look), but They were too much wheel so i stuck with the 9s. Need to switch out to BMW center caps but I'm liking the new look.
https://s9.postimg.cc/6eqf6yfxb/IMG_2797.jpg
They look great!
Sent from my SM-G955U using Tapatalk
Love that color.
This bastard.
https://uploads.tapatalk-cdn.com/201...20670e21ab.jpg
Sent from my SM-G955U using Tapatalk
What exactly is that
Hah, mine didn’t even have one. Just a rusty, twisted 6” nub attached to the transmission.Quote:
Originally Posted by danewilson77
The bracket from the bottom of the tranny to the exhaust pipes about 1’ down from the manifolds.Quote:
Originally Posted by BADCLOWN
Dustin needs this part I think.Quote:
Originally Posted by danewilson77
I picked up brand new stuff from Pelican Parts at a $50 savings over ecstuning.com. Granted the stuff at ECS was genuine BMW and I ended up with after market.
It's a steel bracket!
Sent from my SM-G955U using Tapatalk
Looks like there was no way in hell that nut was coming off.... probably a good thing that it broke off for you...
I had to take mine off when I swapped by exhaust a few weeks ago.... I left it on the exhaust until I had to off the car... wasn't quite as bad as yours and was salvageable but I had to use heat to get the nut off...
Well, I replaced the fuel pump gasket on the ZHP, as the indy who did the FP put it in upside down and crushed it. Clown shoes.