With the subframe out of the car I started to take it apart and made a list on what to replace.
Things to note:
Rust sucks and a torch is your best friend. Bolts are seized on and the only way to remove them is with heat and a hammer.
Also meyle hd control arms are terrible. I don't suggest buying them.
So I am looking at replacing the control arms, engine mounts, complete tie-rods assemblies, steering bushing, and all new hardware.
The hubs are rusty but the bearings are still good. And so are the z4m fcab. Will clean up the subframe and probably coat it with por15.
And for kicks is a picture of the exxon Valdez oil spill https://uploads.tapatalk-cdn.com/201...f48e320f5f.jpghttps://uploads.tapatalk-cdn.com/201...911728a962.jpg
Sent from my Pixel 2 XL using Tapatalk