MINI today? #2

Printable View

Show 40 post(s) from this thread on one page

05-13-2013, 01:36 PM
johnrando

Quote:

Originally Posted by Hornung418

Rob I can set up another group buy if necessary. It would have to be another behind the scenes project.

From a GS3, this was sent.

How bout a single buy, I have mine for sale. (Hadn't listed them yet, but mentioned them).
05-13-2013, 01:40 PM
Hornung418

That's fine John :)

Just puttingnit out there that peiple who are interested can send me a PM and we can discuss further.

From a GS3, this was sent.
05-13-2013, 05:04 PM
Crestwood1001

Quote:

Originally Posted by Hermes

it's not that bad as long as you can swear like a drunk sailor ;)

check your DISA, plus clean TB and ICV if you're going in there already. Might wanna do CCV also at the same time

Not sure iv got it in me to do the CCV, I know I should do it, but it seems like a s*it show. I ordered the boots and the upper boots F connector cause im sure mine will crack. If I decided the lower boot needs replacing I will grab a disa repair kit while im in there.
05-13-2013, 05:12 PM
Imola.ZHP

Quote:

Originally Posted by Sockethead

They cover the damage to point... these splitter don't wrap around to the wheel well. Unforunately, these were a one time group buy from some guy in Europe...I don't think they are available any more.

Yea the X5 is an awesome machine... with 360HP, it blows the doors off of most cars yet it's comfortable and can pull a 6000 lb trailer

Hmmm, considering this will be my 3rd (or 4th) pair of spotters, maybe I should stick to that which is readily available.

As for the x5, I still look at them every 4-5 months, but our previous talks of transmission issues and other maintenance issues keep me from pulling the trigger. This boring Homda CR-V needs to go though. Maybe we'll look at current body x5's when the new ones come out and resale takes a dip.
05-13-2013, 06:12 PM
az3579

I took off my bumper trim pieces for a respray in PlastiDip. It's temporary, but it gets the job done.
There is ONE piece that literally got blown over by the wind right after spraying. It ended up on the floor, and needless to say got all fudged up as it wasn't dry yet. Quickly wiped it off and resprayed. I have to redo that one as it's very rough and crappy, just ran out of time to do it today.

Not telling which one. :shifty

http://i200.photobucket.com/albums/a...ps55b6b192.jpg

http://i200.photobucket.com/albums/a...ps7e154cc1.jpg

Still need to do the side trims. Those aren't bad, only very slightly grey, so I'll just spray those black paint when I redo my bumper trims in actual paint instead of PD.
05-13-2013, 06:14 PM
Avetiso

Wobbie looks great.
05-13-2013, 07:10 PM
johnrando

Quote:

Originally Posted by Avetiso

Wobbie looks great.

+1
05-13-2013, 08:55 PM
SoloEuro

Mtech II rear and New paint + more... :)

http://farm8.staticflickr.com/7288/8...7ae4a3d3_b.jpg
Alpine White BMW e46 330Ci Modified at Sun Down. by Center SpotLight Media (SoloEuro), on Flickr
05-13-2013, 09:00 PM
Pip

^Finally!! Glad it got out of the booth.
05-14-2013, 02:18 AM
az3579

Quote:

Originally Posted by Avetiso

Wobbie looks great.

Quote:

Originally Posted by johnrando

+1

Thanks guys!

Quote:

Originally Posted by SoloEuro

Mtech II rear and New paint + more... :)

http://farm8.staticflickr.com/7288/8...7ae4a3d3_b.jpg
Alpine White BMW e46 330Ci Modified at Sun Down. by Center SpotLight Media (SoloEuro), on Flickr

So how'd you end up getting it out of the booth??

Sent from my DROID RAZR MAXX HD

Show 40 post(s) from this thread on one page