Nice choice!
Printable View
Nice choice!
Lookin' good so far Gary! Just wait till you see these light up! You'll love them :thumbsup
Wiring and connections look nice and beefy.
"No flamesuit required"
Thanks! Yes the wiring is pretty decent. The one thing I really like about these Angel Eyes is the wiring is encased in the plastic ring. The Helios Angel Eyes from Khoalty I had on my ZHP were not and 3 of the 4 wires pulled out while putting my lights back together and I had to solder them back on.
I decided to install a switch like I did on my ZHP. I mounted it in the center console button assembly.
Attachment 17988
Attachment 17989
Attachment 17990
Here they are, man these are Bright!! You almost can't look directly at them. I didn't hook up the night controller as it didn't seem to dim them much at all.
Attachment 17991
Attachment 17992
Attachment 17993
Nice werk. They look great.
Do you mind taking a photo of the wiring near the positive/negative terminal (passenger side engine bay)? I broke a wire and took them off but now wondering how to put them back. Also if you could explain the switch I'd be appreciative as that would be ideal for me.
You don't need DRLs with these AEs Gary :thumbsup The switch part is interesting....I'd also like to hear more about this :)
Thanks John! I need to hook up the night controller as these suckers are too bright. I can actually drive without headlights. [emoji15]
Sean where exactly did the wire break off? At the Angel Eye relay?
I will draw a diagram on wiring the switch when I get home later.
Oh and I found out the two trigger wires that go to the relay cannot be switched.
White- Goes to the accessory Red/Yellow wire in the DME.
Yellow- Goes to the foot well light.
If you reverse them the relay chatters like crazy! Also if you pull the fuse to the Angel Eye relay the foot well trigger still turns on the Angel Eyes. Weird.
I tested it yesterday and didn't notice much of a difference so I didn't hook it up. Apparently I should have.