My Mystic Adventure...

Quote:

---

Originally Posted by nextelbuddy

He will actually want the schwarz M3 seat trim pieces. They have the hole for the rear and side bolster switches.

https://www.realoem.com/bmw/enUS/par...&q=52107902279

https://www.realoem.com/bmw/enUS/par...&q=52107902280

---

Thanks for the correction! I knew they were M3 chairs, but went to my ZHP default page at realoem.

I will be sourcing the track covers for my seats first though...

https://www.cheapoemparts.com/oem-pa...er-52108248211

https://www.cheapoemparts.com/oem-pa...er-52108248212

When I pulled off the OE seats, I forgot to transfer the track covers onto the new seats. I had the opportunity to transfer the track covers onto the new seats but I obviously missed that...

Quote:

---

Originally Posted by cakM3

It's always good when sharing it with fellow forum members Rich. :thumbsup I have done 3 long distance road trips with Botond this year already :)

When you locate something unique that you want to incorporate into your build, you do what it takes to get it. This was the case since Shawn did not want to ship out his interior. I completely understood this so getting Shawn's unique interior was all the excuse I needed to make the trip to get them and also to meet an awesome enthusiast and see his project first hand. If I had to do this again, I would easily say yes... I would make the trip to get this interior again! :)

---

I hope I can do something like this soon! Also, I see there were a few ZHP reunions. Though I am new to the forum, I would like to see if we can get something like this going. I know times are weird, but it gives me a reason to get out and use it as a work excuse.

Quote:

---

Originally Posted by ItsRichieRich

I hope I can do something like this soon! Also, I see there were a few ZHP reunions. Though I am new to the forum, I would like to see if we can get something like this going. I know times are weird, but it gives me a reason to get out and use it as a work excuse.

---

You have a few Mafia members out there where you're located. Rando (johnrando), Hieu (sillieidiot), Kevin (RITmusic2K), Bryan (PHZ), Will (wsmeyer), and Brennan (CarbonZHP) just to name a few...

I'm sure if you reached out to these guys you can probably get a few more (San Fran and San Diego members to come for your "Cali Reunion meet" :thumbsup

All you have to do is figure out the venue, where you want to hold the meet (with all this COVID crap going on), where you guys want to cruise (lots of awesome roads out there to do this), then eats.... Compared to the east coast there is so much more to do where you're at...

You can start by reaching out to Rando and Hieu and see what they have to say about this :thumbsup

Charlie, as usual, awesome stuff going on in your thread. And yes, feel free to HMU.

Sent from my SM-G998U using Tapatalk

Quote:

---

Originally Posted by johnrando

Charlie, as usual, awesome stuff going on in your thread. And yes, feel free to HMU.

---

I try not to disappoint John[emoji1687]


Sent from my iPhone 11 Pro Max using Tapatalk Pro

I just received notification from Mike Miggs, owner of Status Gruppe Tuning, tonight that my CSL bootlid for sedan is almost ready for shipment so that means I will be getting my new bootlid before my birthday to install on blauzed :cool

https://live.staticflickr.com/65535/...59b96a36_b.jpg

Once the shipment arrives I will be taking pictures before install and after I install the new bootlid :drevil

Cool! I have one of his for my vert.

Sent from my SM-G998U using Tapatalk

Quote:

---

Originally Posted by cakM3

I just received notification from Mike Miggs, owner of Status Gruppe Tuning, tonight that my CSL bootlid for sedan is almost ready for shipment so that means I will be getting my new bootlid before my birthday to install on blauzed :cool

https://live.staticflickr.com/65535/...59b96a36_b.jpg

Once the shipment arrives I will be taking pictures before install and after I install the new bootlid :drevil

---

Let's see if you have to do any modifications on the key hole , or anything else. This is the only reason I hold back on buying another csl trunk . Of course is not the same brand you bought . But this is why I'm wondering once u get it install

Sent from my SM-G988U using Tapatalk

Quote:

---

Originally Posted by johnrando

Cool! I have one of his for my vert.

---

Any issues with fitment or keyhole on your SGT CSL bootlid Rando?

Quote:

---

Originally Posted by rguti153

Let's see if you have to do any modifications on the key hole , or anything else. This is the only reason I hold back on buying another csl trunk . Of course is not the same brand you bought. But this is why I'm wondering once u get it install

---

The SGT CSL bootlids are molded after the Scorza CSL bootlids with the sedan one modded to fit sedans. As for the keyhole that should be the same as the Scorza bootlid.

I had a Scorza CSL bootlid on my M3 and did not have to mod the key hole on that bootlid. Everything fit perfectly so I’m expecting no issues with the SGT bootlid.

We shall see however and if I have issues then I will document them here in this thread.


Sent from my iPhone 11 Pro Max using Tapatalk Pro