And don't forget the Sonax wheel cleaner stuff. :)
Sent from my SM-G900V using Tapatalk
Printable View
And don't forget the Sonax wheel cleaner stuff. :)
Sent from my SM-G900V using Tapatalk
I had DS2's on my old M3 and M-technic. I use to pull each wheel once a year and clean the front and back. For the spokes I would run a towel through each one to scrub out the tops and bottoms of the spokes. After I would apply a coat of good wax which helped minimize the brake dust sticking
I used this brush for the first time today and I was amazed on how well it did, especially in between the spokes. I doused them in simple green for a few minutes prior and with soap and water they cleaned up exceptionally well. Thx for the recommendation.
http://uploads.tapatalk-cdn.com/2016...4ca759cb7a.jpg
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Yeah. It's not perfect but does do a pretty good job. I also have a long cone shaped one for the barrels.
---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46fanatic
Thanks brofessor.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Don't we all?!
---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46fanatic