Window regulators, BMW's achilles heel. Anyone know who makes the OE part?
Printable View
Window regulators, BMW's achilles heel. Anyone know who makes the OE part?
Fabergé Egg Co.?Quote:
Originally Posted by Will
Sent from my iPhone using Tapatalk
I think the original BMW ones say Brose, I think that's the brand that makes the regulators. Not sure who makes the motors though, probably Bosch or VDO if I had to guess.
Good to get done though
Sent from my SM-G988U using Tapatalk
My thoughts as well.Quote:
Originally Posted by Galapolis
Yeah, I suppose. My driver side squeals going up and down so I'll have to look into that side next.Quote:
Originally Posted by johnrando
I just went ahead with an OEM one. I figured if it was good enough to last 16 years, thats good enough for me. Price definitely hurts and I put it off until my passenger window would slide down on the highway :facepalm
If I had a sedan I'd be more tempted to go OEM but the price difference is too big not to try Uro on the coupe. Especially since I may have to buy another one for the driver side soon. :(Quote:
Originally Posted by JPMo
For what it's worth the Üro Premium regulators seem to hold up quite nicely. I've installed a lot of them in customer cars (E39, E46, E53) and haven't really had to do any warranties on them yet.
I replaced mine with the OE regulator from FCP euro. It was less than $200 so didn’t bother with other versions. My original lasted 14 years, so figure that another OE one will outlast the car/me
Sent from my iPhone using Tapatalk
ZHP is still on the back burner but some interesting things have been goin on. I decided to start the rear subframe reinforcement on the LSB and I'll be swapping in the complete rear end out of another E46 M3 project I had. The assembly going in will have new upper/lower ball joints, new RTABs w/ limiters, TMS solid subframe bushings, TMS street camber arms, OE front diff bushing and I will be giving the E36 M3 rear diff bushings a shot. Its not nearly as clean as I would like it to be as the previous M3 it was supposed to live in cosmetics weren't a concern but I'm not tearing it apart again (right now) to get everything clean and recoated.
Old assembly out
https://live.staticflickr.com/65535/...4ca05949_b.jpgUntitled by jake ellegard, on Flickr
"New" one that will go in.
https://live.staticflickr.com/65535/...eff25299_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...1aa7b611_b.jpgUntitled by jake ellegard, on Flickr
Some before cleaning.
https://live.staticflickr.com/65535/...78d66fc1_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...1f2fd6ed_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...6f0c2823_b.jpgUntitled by jake ellegard, on Flickr
After a bit of cleaning. Overall, it was pretty clean with only a couple areas that will need to addressed before the plates get welded on.
https://live.staticflickr.com/65535/...2817aa09_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...9dd27cc8_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...d16ef65c_b.jpgUntitled by jake ellegard, on Flickr
This is why it's important to clean. You would likely not see this otherwise.
https://live.staticflickr.com/65535/...2534f2f9_b.jpgUntitled by jake ellegard, on Flickr
Thats where I'm at with that. Still need to get the plates and the gas tank cleaned.
Onto the next thing. The absolute last thing I need right now is another car but here it is. My buddy sent me a link to a car out of state on FB market place and after taking a look at it I had to have it as it had some really nice parts and was very cheap. It was being sold cheap due to an "engine noise". I'm not sure what the culprit is yet but it runs/drives. From briefly listening to it it sounds like a top end tapping/knock so I'll make sure the spark plugs are torqued and do an oil change as I imagine the oil in here is several years old. (previous owner said he had it for 3 years and almost never drove it)
Someone at some point really loved this car as you can see below. A binder of records/receipts was included that somehow made it to me after being passed through several owners since the guy that did all this. There were even copies of emails from ESS regarding the new supercharger he bought. This guy even printed out full color instructions of the install (and also had a dvd copy).
To summarize;
2001 330ci, 5 speed, 143k miles
BMW Perfomance strut brace
BMW Performance intake
ESS TS1 supercharger
SSR 18'' GT3 wheels
E46 M3 seats
ZHP cluster?
Full carbon trim set from EAS
some kind of aftermarket sound system
Picking it up.
https://live.staticflickr.com/65535/...d07bf9e2_b.jpgUntitled by jake ellegard, on Flickr
Back at home. (hood is not latched on the driver side because for some reason its interfering with the intake)
https://live.staticflickr.com/65535/...0b255555_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...0a274c2b_b.jpgUntitled by jake ellegard, on Flickr
You can see here where the intake was slightly damaged from the hood hitting it.
https://live.staticflickr.com/65535/...e6f9f666_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...353303fd_b.jpgUntitled by jake ellegard, on Flickr
Looks like it originally had red interior.
https://live.staticflickr.com/65535/...f4127e48_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...aa06290a_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...8962542e_b.jpgUntitled by jake ellegard, on Flickr
https://live.staticflickr.com/65535/...7fa5a508_b.jpgUntitled by jake ellegard, on Flickr