The Random E46/ZHP Question Thread

Yup, M3 baffle is easy.

Sent from my SM-G935V using Tapatalk

Where is a good place to get clear corners? I have two set of yellow corners, one trimmed in silver and one in black, that I plan on selling, along with the headlight washer units, to fund this purchase. just need to know who people have sourced their's from

Quote:

---

Originally Posted by GotZHP

Where is a good place to get clear corners? I have two set of yellow corners, one trimmed in silver and one in black, that I plan on selling, along with the headlight washer units, to fund this purchase. just need to know who people have sourced their's from

---

ECS Tuning has them.
Here's a link to the Genuine BMW kit:
https://www.ecstuning.com/b-genuine-...t/63130141567/

Depos are cheaper but in my experience, Depo makes garbage products for BMW (been through my fair share, having to replace them)... they're not THAT much cheaper either, so it's worth the extra few bucks for OE ones.

Quote:

---

Originally Posted by az3579

Depos are cheaper but in my experience, Depo makes garbage products for BMW (been through my fair share, having to replace them)... they're not THAT much cheaper either, so it's worth the extra few bucks for OE ones.

---

Agreed! If I could go back in time, I would have bought these instead of the crappy DEPOs.

Quote:

---

Originally Posted by az3579

ECS Tuning has them.
Here's a link to the Genuine BMW kit:
https://www.ecstuning.com/b-genuine-...t/63130141567/

Depos are cheaper but in my experience, Depo makes garbage products for BMW (been through my fair share, having to replace them)... they're not THAT much cheaper either, so it's worth the extra few bucks for OE ones.

---

Got mine here :

https://www.turnermotorsport.com/BMW...ro-tail-lights

Sent by the Pixel XL

+1. That's also where I got my clear turn signals.

Quote:

---

Originally Posted by theothersawyer

SAME! Except my Miata is 22 years old with 223k miles!

---

Looks like I have some catching up to do in the next year!

What is anyone using for an in-car phone mount? I can't seem to find a single thread about this (I can find many threads that have phone mounts, but not a single thread with feedback on many phone mounts).

Quote:

---

Originally Posted by TheFinanceGuy

What is anyone using for an in-car phone mount? I can't seem to find a single thread about this (I can find many threads that have phone mounts, but not a single thread with feedback on many phone mounts).

---

I have a Bimmian cell phone bracket (Link) and a ProClip cell phone mount attached to that using four bolts purchased from a hardware store and spray painted black. I love the setup, it's very good. Some people have complained that the Bimmian mount won't sit flush underneath the trim so it pushes the trim out. I had that to a small extent but found I could rotate the mount enough to get it all to seat correctly. The ProClip I was initially very happy with but after about 3 months it started rattling and I have not been able to isolate the rattle for the life of me. It's not a terrible rattle, it's only over rough roads, but still annoying. Overall I like the setup very well. I have the audio aux installed in the back left area of the cup holder. It doesn't get in the way of the shifter and I can hand the wire to the back seat if people there want to listen to music.

EDIT: You can get a better idea visually in my project thread here (just scroll down through the post a bit): http://www.zhpmafia.com/forums/showt...711#post464711

Quote:

---

Originally Posted by BMWCurves

I have a Bimmian cell phone bracket (Link) and a ProClip cell phone mount attached to that using four bolts purchased from a hardware store and spray painted black. I love the setup, it's very good. Some people have complained that the Bimmian mount won't sit flush underneath the trim so it pushes the trim out. I had that to a small extent but found I could rotate the mount enough to get it all to seat correctly. The ProClip I was initially very happy with but after about 3 months it started rattling and I have not been able to isolate the rattle for the life of me. It's not a terrible rattle, it's only over rough roads, but still annoying. Overall I like the setup very well. I have the audio aux installed in the back left area of the cup holder. It doesn't get in the way of the shifter and I can hand the wire to the back seat if people there want to listen to music.

EDIT: You can get a better idea visually in my project thread here (just scroll down through the post a bit): http://www.zhpmafia.com/forums/showt...711#post464711

---

Thanks! I actually have a Bimmian phone bracket.

Think I'm going to try the wiz gear mag mounts. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1