baller pillows
Printable View
baller pillows
Randeaux... FYI:
I think you have the phone mount installed backwards...
The push-thingie is supposed to be on the left. This is so that when you push it, the phone holder doesn't come flying off the hard mount.
Yes.Quote:
Originally Posted by az3579
Sent from my Samsung Galaxy S4
Today I washed Wobz with a good ol' fashioned hose. My usual washing method involves 4 gallons of distilled water and two buckets, with a quick rinse at a self-car wash prior to using the buckets. ONR in one bucket, the other one is used to rinse the mitt. Then, dry with a microfiber that I have to wring out twenty-thousand times.
Today I used the hose, two buckets, and shammy. Much faster...
Too bad I have to go into a flea-infested basement to turn the water on. :(
It was hot out so I drove the ZHP because working AC is nice
http://img.tapatalk.com/d/13/09/09/synavazu.jpg
You can install it either way, and it rotates. So thanks, but it's not on backwards.Quote:
Originally Posted by az3579
Sent from my DROID4 using Tapatalk 2
Well I´ve been out the last couple of days had the opportunity to go to Berlin b/c of work and was able to go around the city, beautiful and tons of awesome looking BMW´s but very little time to take out the camera and take a picture.
Was able to go to a dealership but unfortunately the one I chose to go to was closed due to a showroom setup, pretty sure I saw an M4 through a small peephole heheheheh.
Now back home need to take Heinz to the shop for maintenance and get the passenger window regulator replaced
A few pics..
Are you just replacing the LCD? I have read a DIY on an x5 board, seems kinda intense.Quote:
Originally Posted by johnrando
Just went to clean out the cabin in my e30 to drive it to work tomorrow and haven't driven or even started it in a month and that sob started on the first crank and my phone charger was still plugged in... Best Car eva fo sure. #itneverletsmedown
+1,000,000.Quote:
Originally Posted by Johnmadd