Angel Eyes (where to get them from)

It doesn't apply to you, only applies to 2dr facelift. Basically you have to bake the headlamp to take them apart

Whew. Thanks.

Here are some pics. You can see the inner angel eye is cut off (in these pics) on the top left by the bezel.

http://img.tapatalk.com/45863cd9-532e-9f83.jpg

http://img.tapatalk.com/45863cd9-5341-d7b7.jpg


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by HokieZHP

Mr hish- I'll take a pic for you when I get home in about 30 minutes.

Das Boots- I did not order that option... Install is straightforward, especially for sedans. Just unclip lenses, clip on AEs, run wires over the headlight itself and out the rear grommet, run wiring from ECU to headlights and connect it and put the lenses back on.

Had I not gotten so confused and realized the connections come out of the little white box, making it much easier to run wires out the back of the headlight casing, I could have had it done in under an hour. Instructions are very clear as well.

Tips: Disconnect the wires from the white box, label them and run them out of the headlight then reconnect them.

---

Explain more on the little white box and it's connections. If you can provide some photos, that would be great.

There's two wires coming out of each angel eye and so all 4 leads go into a white box with only 2 wires coming out that goes to the harness. You have to disconnect all 4 wires, run them through the back of the headlight, then reconnect them to the box since the box is too big to fit through the back of the headlight.

So where do you put the box if not behind the headlights?

I used some double-sided tape and taped it to a flat spot I found behind the headlight casing.

Two box per side, right? I get it. I might need to PM you when the time comes for my hook up. Or maybe just ask for technical help with Umnitza.

No there's one box per side. 4 wires go into one box and there's two wires coming off each halo.

Feel free to PM me if you need.

Right. One box per side. Fingers went faster than what was to come out.....LOL. Thanks.