BMW E46 ZHP DIY and Preventative maintenance doityourself

Added 45. DSC / ASC E46 Information

http://www.bmwtech.ru/pdf/e46/ST034/9%20Engines.pdf

Added DISA operation to #11.

Quote:

---

Originally Posted by danewilson77

Added DISA operation to #11.

---

Great info Dane! How about adding the G.A.S website link on #11 for the retrofit option instead of buying a entire new DISA. Very happy with the results and quality of the parts.


Bayerische-Motoren-Werke

Quote:

---

Originally Posted by WOLFN8TR

Great info Dane! How about adding the G.A.S website link on #11 for the retrofit option instead of buying a entire new DISA. Very happy with the results and quality of the parts.


Bayerische-Motoren-Werke

---

It's down around #43 I think.

Sent from Williamsburg, VA USA

Cool

Added.

45. Are you installing a strut bar, that does not allow enough strut mount bolt to show (for fastening)?

http://forum.e46fanatics.com/showthread.php?t=927849

Added

46. How to wet sand a panel on your E46

Dane just a heads up. This Link under 20. Pillar felt sag

The link works, but it doesn't have any pictures anymore. I can't find anything else on the internet that shows how to remove C pillars on a sedan

Quote:

---

Originally Posted by Newjack

Dane just a heads up. This Link under 20. Pillar felt sag

The link works, but it doesn't have any pictures anymore. I can't find anything else on the internet that shows how to remove C pillars on a sedan

---

Ok. Thanks. I'll add some stuff. Just so ya know....start to pry up the c pillar corner-most forward, then when its loose (the entire pillar), then you can reach behind and unplug the light. Done.

Sent from Williamsburg, VA USA

47. E46 BMW Performance Strut Bar install Instructions