What did you do for your ZHP/BMW today?

Quote:

---

Definitely going Meyle this time around. I installed OEM about 10k ago, and the steering wheel is twitching again when I stab the brakes.

---

Are you sure its the new CABs that are shot and not warped rotors? If you waited too long to change the bushing after you started to feel the shimmy during breaking it might have warped your rotors, especially if the current shimmy is a lot less then original. I say this is because that is what happened to me, even though I installed Meyle HD bushing my shimmy stayed although there was improvement. I had to put new set of rotors to completely eliminate it. Just saying, bushings should last a little more than 10k regardless which ones you got.

http://i1234.photobucket.com/albums/...-03-34_281.jpg



Droid X. Tapatalk. Use it.

Quote:

---

Originally Posted by CERF04ZHP

Definitely going Meyle this time around. I installed OEM about 10k ago, and the steering wheel is twitching again when I stab the brakes.

---

yep, this is what I'm feeling except I noticed it right away... When I had my diff mount replaced I asked them to check out the front end while it was on the lift... something I can't do laying on the ground. He said that they were reaaly soft and had a Mfr. date of '08

Quote:

---

Originally Posted by SkiB97

Are you sure its the new CABs that are shot and not warped rotors? If you waited too long to change the bushing after you started to feel the shimmy during breaking it might have warped your rotors, especially if the current shimmy is a lot less then original. I say this is because that is what happened to me, even though I installed Meyle HD bushing my shimmy stayed although there was improvement. I had to put new set of rotors to completely eliminate it. Just saying, bushings should last a little more than 10k regardless which ones you got.

---

Good point....My rotors are brand new. Also I'm not feeling any shimmy or wobble. Just the classic beat LCAB pulse in the steering wheel when hitting the brakes.

I wish I had the time to swap them out before the road trip.

Quote:

---

Originally Posted by danewilson77

I feel way, way, way too much of the road. Also....the just kind of slipped onto the control arms....whereas the HD's need to be helped on. Front end just doesn't feel right, and I would bet half a paycheck its the CAB's. JW77(my indy mechanic) is throwing the Meyle's on this week.

Droid + Tapatalk = FTW!

---

That's good to know. I was thinking about trying them. I use my car to go from site to site every day... don't that in the wheel.

Where did you get the Meyle's? Maybe I'll just overnight them and throw em on the car before I leave.... There is no differnce on ZHP when ordering, no?

No difference for the ZHP.

Did Meyles on my 325 and the ZHP. Very happy with them.

Droid X. Tapatalk. Use it.

Quote:

---

Originally Posted by kayger12

http://i1234.photobucket.com/albums/...-03-34_281.jpg

---

Nice, man!!!
what was the exact procedure for the removal of the 330Ci badge?

Thanks, Wash.

Crest Glide Deep Clean Cool Mint Floss took the letters/numbers right off with a little sawing motion. Then I removed the larger pieces of left over adhesive with my fingers and went over it with some Goo Gone.

After that, there was just the slightest visible outline of adhesive where the letters were that I couldn't get off with the Goo Gone and a microfiber, so I broke out the Porter Cable and some Menzerna finishing polish.

Total time was about 15 minutes.

Thanks...I have floss, and bug/tar cleaner and rubbing compound/wax etc...should be ok...
I am leaning towards doing mine....should I? should I?

Wash, I've been waffling for months.

Marc (zhpnsnv) was here yesterday and sold me on it.

Glad I did it. Instantly makes the back end look cleaner/better, imo.

if I do it, I want to make the trunk lock hole also body color...I know there are door key hole plugs...wonder if they'll fit.