The Random E46/ZHP Question Thread

The Turner spacers I had were top notch too. Well machined and anodized and had the machining for easy removal

My H&R spacers were by far the nicest spacers I’ve owned. My Macht Schnell spacers seem well-made, but it’s so hard to tell variances in tiny 3mm spacers.

Cool cool, thanks for the recommendations everyone.

Quote:

---

Originally Posted by 704sw

35mm bolts for a 10mm spacer. I think 3mm (*maybe* 5mm, but I wouldn’t try it) is the largest you can go with the factory 26mm lug bolts.

---

Thanks dude!

Quote:

---

Originally Posted by nextelbuddy

Thanks dude!

---

Got u fam

Does anyone know what size e-torx the front subframe bolts are? RealOEM, the Pelican OPG DIY guide, etc. all say they’re hex, but mine are bigboye e-torx.

Quote:

---

Originally Posted by Sockethead

You might want to put that bracket back on if you have it. It helps stabilize the exhaust when the engine/transmission move on their mounts. Some claim that it helps with NVH too. I put it back on because I have headers and wanted as much support for them as possible.

There are two threads on e46f about this exhaust with links to additional threads... I'll post the links when I get home tonight

---

Installed last Saturday. Thanks homey

Quote:

---

Originally Posted by Sockethead

After looking at the condition of Dane's, that might be a good idea :)

---

Yeah... It was trashed. The non OEM bracket and arm from FCP bolted in nicely.

Sent from my SM-G955U using Tapatalk

What's the torx screw in the foglights for? Adjustment?

Quote:

---

Originally Posted by holyc0w

What's the torx screw in the foglights for? Adjustment?

---

Do you have a pic? I don’t remember a torx on the fogs.

@704sw

This whole thing

Attachment 32880