Nice upgrade! [emoji106]
Printable View
Nice upgrade! [emoji106]
Thanks guys. And Peter, Terra (Mirza) was a bit baffled that it didn't pick up the correct miles from the ECU he reprogrammed. He had the original cluster too and it showed 202k. I need to get PASoft working and see if the LCM will push the correct miles to the cluster.
Replaced the engine evap breather valve.
did you get your mileage issue straitened out?
No. I can't get PASoft running on my Win10 laptop after the last MS updates... :-(Quote:
Originally Posted by Sockethead
what happens when you launch PASoft?Quote:
Originally Posted by ELCID86
Hardware not read (or found)...Quote:
Originally Posted by slater
Did you try rolling back the drivers?
No. Not quite sure how. Tried to update them to the ones in the files Tony sent me but couldn't get them to work.Quote:
Originally Posted by Sockethead
i had that issue with Windows 8 and Windows 10. try this:Quote:
Originally Posted by ELCID86
go into device manager, and see if the 'BMW Scanner' is listed; if so, right click and select 'update driver', then: (from e46fanatics)
"Select the option "Browse my computer for driver software". Then pick Let me pick from a list of device drivers on my computer. Select towards the bottom "Universal serial bus controllers. On the next screen, on the left hand side under manufacturer, look for FTDI. When you click on it, to the right, select USB Serial Converter. Then click next. A message will pop up saying armageddon will reign down upon you and your computer if you install this and it isn't compatible. I decided to go for it and take the risk. Once installed, open up your bmw scanner software and start messing with all your options. "