ZHPMafia Family Reunion 2013 - Williamsburg, VA - Maintenance Thread

Quote:

---

Originally Posted by danewilson77

Ha! absolutely.

Say...if you want to bring your roller as well, it might not be a bad idea to have two. I know guys want this done.

Thanks for offering.

---

how long does it take? i might need to roll mine, not sure yet as i havent installed spacers.

IIRC watching fenders get rolled last year, maybe less than 10 mins. each? Not long.

oh ok, so its not that long, i might need it after putting in spacers... thanks JR..

1. cakM3 (Charlie) - going to complete my install, with Kyle's (static667) help a stereo upgrade on the ///M if I have time, a fender roll
2. GMATT - shark injector and rear window switch mod (Kyle, help please!) And possible steering wheel swap (colby). If any body has the proper battery charger please bring!
3. Alex - Complete stage I and II suspension overhaul. Front wheel bearings. Need RTAB tool, Wheel bearing tools, spring compressor.
4. JupiterBMW (Jon) - fender roll.
5. Sockethead (Rob) - fender roll
6. Torxuvin (Cam) - Brake Rotors/pads (Not 100% but wanted to get my name on the list)

Anyone replaced a rear differential bushing before?

1. cakM3 (Charlie) - going to complete my install, with Kyle's (static667) help a stereo upgrade on the ///M if I have time, a fender roll
2. GMATT - shark injector and rear window switch mod (Kyle, help please!) And possible steering wheel swap (colby). If any body has the proper battery charger please bring!
3. Alex - Complete stage I and II suspension overhaul. Front wheel bearings. Need RTAB tool, Wheel bearing tools, spring compressor.
4. JupiterBMW (Jon) - fender roll.
5. Sockethead (Rob) - fender roll
6. Torxuvin (Cam) - Brake Rotors/pads (Not 100% but wanted to get my name on the list)
7. JayJay_Dee - fender roll

I'm there to watch and learn. Don't mind getting my hands dirty though. May have some maintenance by then. Hearing a little noise on initial start up--tensioners or idler maybe. 70k+ miles. Anyone have the setup to program the clown nose?

1. cakM3 (Charlie) - coding a used LCM with s/w 4.5 (in this case) and enable one-touch triple blink - need a donor car for this
2. GMATT - shark injector and rear window switch mod (Kyle, help please!) And possible steering wheel swap (colby). If any body has the proper battery charger please bring!
3. Alex - Complete stage I and II suspension overhaul. Front wheel bearings. Need RTAB tool, Wheel bearing tools, spring compressor.
4. JupiterBMW (Jon) - fender roll.
5. Sockethead (Rob) - fender roll
6. Torxuvin (Cam) - Brake Rotors/pads (Not 100% but wanted to get my name on the list)
7. JayJay_Dee - fender roll

Have tried to remove myself from list. I will have my items done before the meet.

Gary

Quote:

---

Originally Posted by cakM3

1. cakM3 (Charlie) - coding a used LCM with s/w 4.5 (in this case) and enable one-touch triple blink
2. GMATT - shark injector and rear window switch mod (Kyle, help please!) And possible steering wheel swap (colby). If any body has the proper battery charger please bring!
3. Alex - Complete stage I and II suspension overhaul. Front wheel bearings. Need RTAB tool, Wheel bearing tools, spring compressor.
4. JupiterBMW (Jon) - fender roll.
5. Sockethead (Rob) - fender roll
6. Torxuvin (Cam) - Brake Rotors/pads (Not 100% but wanted to get my name on the list)
7. JayJay_Dee - fender roll

---

I'll code the triple touch and my car could be the donor car to code anything else anyone needs. I will put together a whole compiled excel sheet of things that would be possible to code before reunion hopefully.