Anyone have personal experience with this outfit?Quote:
Originally Posted by ELCID86
Printable View
Anyone have personal experience with this outfit?Quote:
Originally Posted by ELCID86
What month was (is) the model year cross over for BMW? My 04 is a 08/04 production. . .that has to be pretty late for an 04?
Probably Septemberish. Mine is an 05 at 09/30Quote:
Originally Posted by jwalther
Sent from my iPhone using Tapatalk
Pretty sure mine is an 08/04 and is a model year 2005.
http://c1552172.r72.cf0.rackcdn.com/128936_x600.jpg
http://www.ecstuning.com/ES50296/
Could this part be the cause of a serious "pirate ship" clunking when braking ? It's about the only thing I didn't replace when I changed out my struts for OEM. If not this, what else ? Entire front end is new apart from sway bar bushings.
Yes - twice. Had Homelink added to my M3-style oval mirror in my Z4MC. Super-clean job, if not cheap. After I bought my ZHP I found a Homelink mirror on Ebay (convertibles had Homelink on the mirror, coupes/sedans had the kit for putting it in the overhead console). It had a bubble (and was priced appropriately) so I sent it to Scott @ radar-mirror for his $99 repair. 1-day turnaround, perfect results. The guy does great work and is FAST.Quote:
Originally Posted by jwalther
Yeah MY2005 was a little weird. The 8/04 builds were titled 2005s, but the model year changes themselves didn't occur until 09/2004 (so the 08/04 builds didn't get the MP3 radio or bluetooth assist modules for example).Quote:
Originally Posted by stephenkirsh
That is the spring seat and bottom bushing. On the other side is where the strut bearing is located. The spring seat itself shouldn't clunk unless the spring was not seated properly, more commonly its a strut bushing that clunks (did you replace the bearings?). A visual inspection should determine if the spring was installed properly.Quote:
Originally Posted by alexandre
Do all 330i/ci have the same driveshaft and input flange on the diff?
No. Input and output shafts can vary between differentials, and drive shafts can different between transmission types.Quote:
Originally Posted by TristanHunter
Sent from my SM-G900T using Tapatalk