Those comments earned you a 3 day ban.Quote:
Originally Posted by NYRhockey
Sent from my SM-G988U using Tapatalk
Printable View
Those comments earned you a 3 day ban.Quote:
Originally Posted by NYRhockey
Sent from my SM-G988U using Tapatalk
Right...They tell you to put more oil in. Instead, what do you do? Argue about why you don't want to. If that's not acting on it, iono what is. I mean if you don't want to do the cheapest and easiest trouble-shooting step, then fine. I got one for you :roflQuote:
Originally Posted by NYRhockey
There might be something inside your oil pan that is covering the sender causing it to have bad readings. The only way to check is to remove the oil pan to clear it out.
Let's be fair guys... the dipstick was showing completely full. I'm not sure what adding oil is going to do. If his car doesn't use much oil then it's going to be overfilled for quite a long time.
Hey guys, I’ve been reading about retrofitting an E46 M3 cluster into my car... does anyone if there is a definitive part number that can work on a car with MS45?
I’m considering just slapping it in and seeing how much coding I can do on my own but I do have a few questions about other features
Wanted to contact terra about an idea I have to see if it’s possible but still unsuccessful so far, so I’m hoping to not venture to deep into this without ruining something lol
I am unfortunately not sure what year car this came out of but I do know it’s an SMG cluster
https://uploads.tapatalk-cdn.com/202...ac1cd2dfe7.jpg
Sent from my iPhone using Tapatalk
Im pretty sure you can use any cluster as long as the code is 24H. On the white label on the backside of the cluster it will say "CODE:" and then a 23H or 24H or whatever. As long as its 24H you should be okay, can be SMG or 6MT.
There are guys on here that can correct me if I am wrong but that's what I used. My indy has a guy who does a lot of BMW coding/programming in his spare time and swapped over the chip from my ZHP cluster to my M3 cluster so it didn't get the tamper dot, along with some other coding I preferred.
I’ll have to double check the cluster later on today for sure, That’s great news! I don’t mind getting into coding seeing as to I’ve always wanted to understand it better.Quote:
Originally Posted by BADCLOWN
How much did they charge if you don’t mind me asking?
Sent from my iPhone using Tapatalk
I honestly don’t remember how much he charged me, sorry I can’t help there
Ok this is a 8/10 randomness questions but - where the heck does this part go:
https://www.realoem.com/bmw/enUS/par...&q=51247035332
It has something to do with the hood, that's all I know.
Oh, great. Anyone ever had this happen? The weld job was done a few years back on a Vibrant muffler, just cracked off today at startup probably due to driving the terrible roads in Champaign for the past few days.
It... doesn’t sound good
https://uploads.tapatalk-cdn.com/202...5a019f7996.jpg
Sent from my iPhone using Tapatalk
Wow, that sux. So, just weld it back up hopefully? I don't know anything about welding.
Sent from my SM-G988U using Tapatalk