Hornung's ZHP Adventure

Reset adaptions after MAF?
Cam position sensors?

Quote:

---

Originally Posted by az3579

Everything is up to date except for cooling system. I can't believe I already put almost 120k on it since December 2010...

Regardless, there isn't a thing I could think of that requires maintenance with regards to performance. The only thing I skipped was post cat O2 sensors since they don't really do anything related to how the car runs...


Sent from my iPhone using Tapatalk

---

Quote:

---

Originally Posted by Sockethead

Reset adaptions after MAF?
Cam position sensors?

---

Yeah have you reset the adaptations? How about the E-Pedal adaptations? How are your plugs and coils? If the coils are OE, I would replace at your mileage.

$32.50 per coil at OEMBimmerparts.

What management software are you running?

Sent from my GS3.

Quote:

---

Originally Posted by Sockethead

Reset adaptions after MAF?
Cam position sensors?

---

This is what I was thinking. Although I don't know the exact symptoms of a failing can position sensor.

Quote:

---

Originally Posted by Newjack

This is what I was thinking. Although I don't know the exact symptoms of a failing can position sensor.

---

A soft fail with no codes will exhibit extreme power loss (Limp Mode engaged), lopey idle and hunting. If BP can drive his car normally his issue isn't with the cam sensors. Although if he has the cash, new OEM sensors would be ideal around 200k miles.

Changed out my belts for Dayco poly W ribs. Really quiet and finally the correct length for my underdrive pulleys.

Sent from my GS3.

Quote:

---

Originally Posted by Sockethead

Reset adaptions after MAF?
Cam position sensors?

---

I reset the adaptations with the computer, but didn't seem to make a difference. Today I unplugged my battery to see if that would do anything and it seems to have helped a lot. I'm afraid of it coming back though... it's a nearly damaging experience to my sanity. lol

Quote:

---

Originally Posted by Hornung418

Yeah have you reset the adaptations? How about the E-Pedal adaptations? How are your plugs and coils? If the coils are OE, I would replace at your mileage.

$32.50 per coil at OEMBimmerparts.

What management software are you running?

Sent from my GS3.

---

Not sure how to reset the E-Pedal adaptations... would the battery dis/reconnect do that? If so, I did that today. Let's see what happens...
4 of the coils are original, 2 were replaced recently with used ones. It was on the list to do all 4 but dayum,

http://media.tumblr.com/5ab692712301...uXw1qz4rgp.jpg


Down the road it'll be done. Cam position sensors should be fine; the car drives and idles fine, just jerky below 2k.

Still clear, Justin? No issues resurfaced?

Broke her loose on the way to work. Drives perfectly.

Sent from my GS3.

Quote:

---

Originally Posted by Hornung418

Broke her loose on the way to work. Drives perfectly.

Sent from my GS3.

---

Makes going to work that much more bearable.


Sent from my iPhone

Am I dapper now?

http://img.tapatalk.com/d/14/08/05/geme4umy.jpg

Sent from my GS3.

Haven't heard that term since I left Buffalo, NY decades ago. Yes, it may pass for Dapper.