on the rug, you can kinda see it in the previous picsQuote:
Originally Posted by Avetiso
http://i29.photobucket.com/albums/c2...92C5EBA834.jpg
adapter brackets my buddy welded up for me
http://i29.photobucket.com/albums/c2...156D91C3A3.jpg
Printable View
on the rug, you can kinda see it in the previous picsQuote:
Originally Posted by Avetiso
http://i29.photobucket.com/albums/c2...92C5EBA834.jpg
adapter brackets my buddy welded up for me
http://i29.photobucket.com/albums/c2...156D91C3A3.jpg
Going to look really nice there JP
sent from Moto X Dev Edition
That's just a piece of 3" stainless I painted black.Quote:
Originally Posted by johnrando
I'm going to use some aluminized steel painted black. If something happens no biggie ($12 for all 4). They'll be welded or maybe riveted to the old connecter piece if the shop makes a reducer.
Got a good spray wash before going into the shop tomorrow for the brake/clutch flush and mechanical inspection at an indy.
Currently dropping my rear subframe to replace my rear sway bar from a 12mm to a 19mm 2-way adjustable.
Currently have the subframe dropped and the bar unbolted. Just need to route it out and bolt everything up
http://img.tapatalk.com/d/14/06/05/yjabu2u7.jpg
http://img.tapatalk.com/d/14/06/05/eby5a6uj.jpg
Sent from my XT907 using Tapatalk
On the 128?
Yes sirQuote:
Originally Posted by stephenkirsh
Sent from my XT907 using Tapatalk
Had to air up the LR tire on the sedan before we left as it was at 28psi. Came back from vacation (12 days) and it was back down to 30psi. Took it to our favorite tire place and had them check it out. Found a pinhole leak in the rim about in the center. They JBWeld'ed it and should be good to go. We had these rims refurbished two months ago, so no idea what it is going on with them. Tire place also confirmed my suspicion on the right front. Slight warped rotor or high spot. Ordered both fronts and replaced this afternoon. Pads only had 20k miles on them with plenty of life left, so just kept them. Running smoothly again after fighting front issues since we had the tires replaced when we did the wheels. Seems the Toyo's have a lot less forgiveness when it comes to hiding suspension/bearing issues. Finally glad to have the wife not nagging me that her car is not "right". She can feel any issue wrong with that car.........
Sonax poly net shield on the hood and fenders. This evening the rest of the car.
Jakksfor20, I think I saw your black sedan going up Sanders road recently...either that or it was another zhp in our neck of the woods!
-r