FS: FCAB Pressed with Z4M Bushings

I am going a different route with the FCABs. The Front Control Arm Bushing is already pressed with the Z4M bushings.

Price is $100 shipped.



http://c1552172.r72.cf0.rackcdn.com/344224_x600.jpg

What is the advantage of running the z4m bushings? I can't seem to remember at the moment and know others might benefit from the knowledge as well, especially if they are looking to replace soon.

sent from S4

Quote:

---

Originally Posted by BimmerWill

What is the advantage of running the z4m bushings? I can't seem to remember at the moment and no others might benefit from the knowledge as well, especially if they are looking to replace soon.

sent from S4

---

I think it was an increase in caster... Kyle would know.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

From ECSTuning. The solid rubber helps a lot more compared to the OEM part. -

Quote:

---

These are control arm bushings from the Z4M which can be used on your vehicle for increased castor, which provides more confident handling and better steering feel
Symptoms of failed control arm bushings commonly include a loose and imprecise feel in the steering, excessive shaking and vibration through the steering that increases with speed and braking, and squeaking, whining or grinding from the front when turning at slow speeds.
These are control arm bushings from the Z4M which can be used on some other vehicles for increased castor, which provides more confident handling and better steering feel. See guide below for additional applications.

---

These are ready to bolt on?

Quote:

---

Originally Posted by Avetiso

I think it was an increase in caster

---

^This

Also, being solid rubber, they should last 2-3x longer than the gel filled ones.

Yep totally ready.

Quote:

---

Originally Posted by Tnhl1989

Yep totally ready.

---

Never installed? If so pm me PayPal.

good price.